Rollei Compact Traveler No. 1 Carbon Tripod User Manual

Uvod

This manual provides detailed instructions for the safe and effective use of your Rollei Compact Traveler No. 1 Carbon tripod. Designed for photographers requiring a lightweight and compact solution, this tripod offers stability and versatility for various photographic needs. Please read this manual thoroughly before operating the product.

Image: The Rollei Compact Traveler No. 1 Carbon Tripod, showcasing its compact design and ball head.

Varnostne informacije

To prevent damage to the product or injury to yourself, observe the following safety precautions:

• Ne prekoračite največje nosilnosti 8 kg (17.64 lb).
• Ensure all locking mechanisms are securely fastened before mounting equipment.
• Avoid placing the tripod on unstable or slippery surfaces.
• Keep hands and fingers clear of moving parts when adjusting the tripod.
• Do not leave the tripod unattended with heavy equipment, especially in windy conditions.
• Clean the tripod with a soft, dry cloth. Avoid harsh chemicals.

Vsebina paketa

Preverite, ali so v paketu prisotni vsi elementi:

• Rollei Compact Traveler No. 1 Carbon Tripod
• 360° Panorama Ball Head (integrated)
• Večnamenski ključ
• 2 imbus ključev
• Quick Release Plate (Arca Swiss compatible)
• Pouch for Monopod
• Ramenski pas
• Removable Rubber Pads (3 pcs.)
• Torba za stojalo

Nastavitev

1. Razstavljanje stojala

1. Release the leg angle locks.
2. Pivot the legs 180° outwards from their folded position until they are fully extended.
3. Adjust each leg to the desired angle and secure the leg angle locks.
4. Extend the leg sections by twisting the quick clamping screws counter-clockwise to loosen, pull out the sections, and twist clockwise to tighten.

2. Pritrditev kamere

1. Ensure the quick release plate is detached from the ball head.
2. Attach the quick release plate to the bottom of your camera using the screw. Use an Allen key or coin to tighten securely.
3. Odprite hitro sprostitev klamp na kroglični glavi.
4. Slide the camera with the attached quick release plate into the clamp dokler se ne zaskoči.
5. Securely tighten the quick release clamp.

Navodila za uporabo

Adjusting Height and Angle

• Odseki za noge: Popustite hitri clamping screws on each leg, extend to the desired height, and tighten firmly.
• Leg Angles: Press the leg angle locks near the top of each leg to adjust the spread of the legs. There are multiple angle stops for varied stability and height.
• Sredinski stolpec: The center column can be extended for additional height. Loosen the center column lock, raise the column, and tighten the lock.

Using the Ball Head

• Gumb za zaklepanje kroglice: Loosen this knob to allow free movement of the camera in all directions. Tighten to lock the camera in position.
• Gumb za zaklepanje panoramiranja: Loosen this knob to rotate the camera horizontally (360° panorama). Tighten to lock the panning movement.

Enhancing Stability

The tripod features a 360° rotating hook at the bottom of the center column. You can hang a camera bag or other weight from this hook to increase the tripod's stability, especially in windy conditions or when using heavy lenses.

Folding for Transport

1. Remove the camera from the quick release plate.
2. Retract all leg sections and tighten the quick clampvijaki za pritrditev.
3. Retract the center column fully and tighten its lock.
4. Release the leg angle locks and pivot the legs 180° inwards, folding them upwards around the ball head until they are compact.
5. Secure the leg angle locks.

Monopod Function

One of the tripod legs can be detached and used as a monopod.

1. Identify the leg with the rubber grip.
2. Unscrew this leg from the tripod's main body.
3. Unscrew the center column from the tripod's main body.
4. Privijte ločeno nogo na spodnji del osrednjega stebra.
5. The ball head can then be attached to the top of this assembly, creating a monopod.
6. To reassemble the tripod, reverse these steps.

Vzdrževanje

• Čiščenje: Wipe down the tripod with a soft, dry cloth after each use, especially if exposed to dust, sand, or moisture. For stubborn dirt, a slightly damp lahko uporabite krpo, ki ji sledi temeljito sušenje.
• Mazanje: Moving parts are generally self-lubricating. Do not apply oil or grease unless specifically instructed by Rollei support, as this can attract dirt.
• Shranjevanje: Store the tripod in its protective bag in a cool, dry place away from direct sunlight and extreme temperatures.
• Pregled: Periodically check all screws, bolts, and locking mechanisms for tightness. Use the provided Allen keys and multifunctional wrench for adjustments.

Odpravljanje težav

Problem: Tripod is unstable.

rešitev: Ensure all leg sections are fully extended and their quick clamping screws are tightened. Verify leg angle locks are engaged. Use the center column hook to add weight for increased stability. Ensure the tripod is on a level surface.

Problem: Camera movement after locking ball head.

rešitev: Tighten the ball lock knob more firmly. Ensure the quick release plate is securely attached to both the camera and the ball head clamp.

Problem: Leg sections are difficult to extend or retract.

rešitev: Check for sand or debris inside the leg sections. Clean thoroughly. Do not force movement; if the issue persists, contact customer support.

Specifikacije

Garancija in podpora

The Rollei Compact Traveler No. 1 Carbon tripod comes with a 24-mesečna garancija od datuma nakupa. Ta garancija krije proizvodne napake in napake v materialu pri normalni uporabi.

For warranty claims, technical support, or spare parts, please contact Rollei customer service. Keep your proof of purchase for warranty validation.

For further assistance, visit the official Rollei webspletnega mesta ali se obrnite na lokalnega distributerja.