1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of the GeoVision GV-MFD2501-6F 2MP Mini Fixed Dome IP Security Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality. Keep this manual for future reference.
1.1 izdelkov konecview
The GV-MFD2501-6F is a compact 2-megapixel mini fixed dome IP camera designed for various surveillance applications. It features a 2.3mm lens, super low lux capabilities, and supports network connectivity for remote monitoring.
Figure 1.1: GeoVision GV-MFD2501-6F Mini Fixed Dome IP Security Camera. This image shows the compact design of the camera, highlighting its dome shape and lens.
1.2 Vsebina paketa
Verify that all items are present in the package. If any items are missing or damaged, contact your dealer immediately.
- GV-MFD2501-6F IP Camera
- Komplet pritrdilnih vijakov
- Navodila za namestitev
- CD s programsko opremo (ali povezava za prenos)
- Vodoodporni priključek (če je primerno)
2. Varnostne informacije
WARNING: To prevent fire or shock hazard, do not expose this unit to rain or moisture.
- Uporabljajte samo napajalnik, ki je predpisan za to napravo.
- Do not open the camera housing. Refer all servicing to qualified personnel.
- Avoid placing the camera in direct sunlight, near heat sources, or in areas with high humidity or dust.
- Zagotovite ustrezno prezračevanje okoli kamere.
- Pred čiščenjem ali vzdrževanjem izklopite napajanje.
3. Nastavitev
3.1 Fizična namestitev
The GV-MFD2501-6F is designed for indoor use. Choose a suitable mounting location that provides the desired field of view in je v dosegu omrežnih in električnih kablov.
- Pripravite montažno površino: Use the provided mounting template (if included) to mark drill holes.
- Vrtanje lukenj: Izvrtajte vodilne luknje za pritrdilne vijake.
- Zavarujte kamero: Attach the camera base to the mounting surface using the provided screws.
- Prilagodi kot: Loosen the adjustment screws to position the camera lens for the desired viewing angle, then tighten the screws to secure it.
Figure 3.1: Illustrative diagram of camera mounting. This image would typically show the steps for securing the camera to a ceiling or wall, including screw placement and cable routing.
3.2 Ožičenje in povezave
Connect the camera to your network and power source.
- Ethernet kabel: Connect an Ethernet cable from your network switch or router to the camera's RJ-45 port. If using Power over Ethernet (PoE), this single cable provides both power and data.
- Power Adapter (if not using PoE): If PoE is not available, connect a compatible 12V DC power adapter (not included) to the camera's power input port.
Figure 3.2: Diagram showing camera wiring connections. This image would illustrate how to connect the Ethernet cable and, if necessary, the power adapter to the camera's ports.
3.3 Začetna konfiguracija omrežja
After physical installation and connection, configure the camera for network access.
- Vklop: Connect the camera to power. The camera will perform a self-test.
- Odkrijte kamero: Use the GeoVision GV-IP Device Utility (available on the GeoVision website) to discover the camera on your local network. The utility will display the camera's IP address.
- Dostop Web Vmesnik: Odpri a web browser (e.g., Chrome, Firefox) and enter the camera's IP address in the address bar.
- Prijava: Enter the default username (e.g., "admin") and password (e.g., "admin" or "1234"). You will be prompted to change the password upon first login for security.
- Nastavitve omrežja: Navigate to the network settings to configure IP address (DHCP or Static), subnet mask, gateway, and DNS settings as required by your network environment.
4. Navodila za uporabo
Once configured, the camera can be accessed and managed through its web interface or compatible GeoVision VMS software.
4.1 V živo View
Od web interface, navigate to the "Live View" section to see the real-time video feed from the camera. You can adjust video stream settings such as resolution, frame rate, and quality here.
4.2 Nastavitve snemanja
Configure recording schedules, motion detection recording, and continuous recording options. Recordings can be stored on a network-attached storage (NAS), local storage (if supported), or a GeoVision NVR/VMS.
4.3 Zaznavanje gibanja
Set up motion detection zones and sensitivity levels. When motion is detected, the camera can trigger recording, send email alerts, or activate other alarm outputs.
4.4 Oddaljeni dostop
To access the camera remotely, ensure your network router is configured for port forwarding (if not using a VPN or cloud service). Refer to your router's manual for port forwarding instructions. GeoVision also offers mobile applications for remote viewing.
5. Vzdrževanje
5.1 Čiščenje fotoaparata
Redno čistite objektiv in ohišje kamere, da zagotovite optimalno kakovost slike. Uporabite mehko, suho krpo. Za trdovratno umazanijo rahloamp Uporabite lahko krpo z blagim detergentom, nato pa suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
5.2 Posodobitve vdelane programske opreme
Periodically check the GeoVision webspletno mesto za posodobitve vdelane programske opreme. Posodobitve vdelane programske opreme lahko zagotovijo nove funkcije, izboljšave delovanja in varnosti. Pazljivo upoštevajte navodila, ki so priložena paketu posodobitve vdelane programske opreme.
5.3 Upravljanje gesla
Regularly change your camera's password to a strong, unique password to prevent unauthorized access.
6. Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Kamera nima napajanja | Power adapter unplugged or faulty; PoE not active. | Check power connections. Ensure PoE switch/injector is active. Test with a known good power source. |
| Ni video vira | Network cable disconnected; incorrect IP address; firewall blocking access. | Verify Ethernet cable connection. Use GV-IP Device Utility to find camera. Check network settings and firewall rules. |
| Ne morem se prijaviti | Incorrect username/password. | Ensure correct credentials. If forgotten, refer to the GeoVision website for password reset procedures (may require physical access). |
| Slaba kakovost slike | Dirty lens; improper focus; low light conditions; incorrect video settings. | Clean the lens. Adjust focus if applicable. Ensure adequate lighting. Check resolution, frame rate, and compression settings. |
7. Specifikacije
The following are key specifications for the GeoVision GV-MFD2501-6F camera:
- Model: 84-MFD2501-6F1U
- Resolucija: 2 milijonov slikovnih pik
- Objektiv: 2.3 mm fiksni objektivi
- Povezljivost: Brezžično Note: While "Wireless" is listed in specifications, this IP camera primarily uses wired Ethernet for reliable data transmission and PoE. Wireless functionality may refer to specific optional modules or control methods.
- moč: PoE (Power over Ethernet) or 12V DC (adapter not included)
- Dimenzije: Approximately 21 x 18.6 x 9.3 cm (Parcel Dimensions)
- Teža: Approximately 487 g (Parcel Weight)
- Delovna temperatura: (Information not provided, typical range is -10°C to 50°C)
- Proizvajalec: GeoVision
8. Garancija in podpora
8.1 Informacije o garanciji
GeoVision products typically come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official GeoVision webspletnega mesta. Shranite dokazilo o nakupu za uveljavljanje garancije.
8.2 Tehnična podpora
For technical assistance, product inquiries, or troubleshooting beyond this manual, please contact GeoVision customer support or your authorized GeoVision dealer. Visit the official GeoVision webspletno mesto (www.geovision.com.tw) for support resources, FAQs, and contact information.