RCF EVOX 12

RCF Evox 12 Portable Array Powered Active Speaker System User Manual

Model: EVOX 12 | Znamka: RCF

Uvod

This manual provides essential information for the safe and efficient operation of your RCF Evox 12 Portable Array Powered Active Speaker System. Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Konec izdelkaview

The RCF EVOX 12 is a high-performance 1400-watt PA System designed for live sound applications. It features a powerful 15-inch subwoofer and a 4-inch top array, delivering balanced and clear audio. The system is built with durable components, offering a maximum Sound Pressure Level (SPL) of 130dB. Integrated Digital Signal Processing (DSP) optimizes sound performance. Its design includes built-in wheels and a handle for enhanced portability, making it suitable for small to medium-sized event environments.

RCF Evox 12 Portable Array Powered Active Speaker System

Slika: spredaj view of the RCF Evox 12 Portable Array Powered Active Speaker System, showcasing the subwoofer unit with the RCF logo and the speaker grille.

Kaj je v škatli

Upon unpacking, verify that all listed components are present and in good condition:

  • 1 x EVOX 12 Subwoofer Unit
  • 1 x EVOX 12 Column Array (Top Speaker)
  • 1 x Speaker Pole for mounting the column array
  • 1 x napajalnik
  • 2 x RCF Bags (for transport and protection)
  • 1 x Uporabniški priročnik (ta dokument)

Navodila za namestitev

  1. Umestitev: Position the EVOX 12 subwoofer on a stable, flat surface. Ensure adequate ventilation around the unit.
  2. Mounting the Column Array: Insert the speaker pole into the designated pole mount on top of the subwoofer unit. Secure the pole firmly. Carefully attach the column array speaker to the top of the speaker pole. Ensure it is stable and locked into place.
  3. Napajalni priključek: Connect the power adaptor to the EVOX 12 subwoofer's power input and then to a suitable AC power outlet.
  4. Avdio vhod: Connect your audio source (mixer, instrument, microphone) to the XLR input connectors on the subwoofer unit. The EVOX 12 supports XLR connectivity.
  5. Vklop sistema: Before powering on, ensure all volume controls are set to minimum. Power on your audio source devices first, then power on the EVOX 12 system.

Navodila za uporabo

  • Nadzor glasnosti: Gradually increase the master volume control on the EVOX 12 subwoofer to the desired listening level. Adjust individual input levels on your audio source as needed.
  • Prednastavitve DSP: The EVOX 12 features onboard DSP. Refer to the control panel for available presets (e.g., Flat, Boost, Playback, Club) and select the one that best suits your application and environment.
  • Vhodni dobiček: Adjust the input gain for each connected source to prevent clipping and ensure optimal signal-to-noise ratio.
  • Zaporedje izklopa: When finished, first turn down the master volume on the EVOX 12, then power off the system, followed by your audio source devices.

Vzdrževanje

  • Čiščenje: Use a soft, dry cloth to clean the exterior surfaces of the speaker system. Avoid using abrasive cleaners or solvents.
  • Shranjevanje: When not in use, store the EVOX 12 in a dry, cool environment, preferably in its protective bags, to prevent dust accumulation and physical damage.
  • Upravljanje kablov: Ensure all cables are properly coiled and secured during transport and storage to prevent damage.
  • Pregled: Periodically inspect cables, connectors, and the speaker pole for any signs of wear or damage. Replace damaged components immediately.

Odpravljanje težav

TežavaMožen vzrokrešitev
Ni zvoka
  • Napajanje ni priključeno ali vklopljeno
  • Volume controls set to minimum
  • Audio source not connected or active
  • Pokvarjeni kabli
  • Preverite napajalni priključek in stikalo
  • Increase master volume and input gains
  • Verify audio source is on and connected
  • Test with different cables
Popačen zvok
  • Vhodni signal je previsok (prekinjajoč signal)
  • Speaker overloaded
  • Incorrect DSP setting
  • Reduce input gain on audio source or EVOX 12
  • Lower overall volume
  • Select an appropriate DSP preset
Sistem se ne vklopi
  • Power cable loose or damaged
  • Brez napajanja iz vtičnice
  • Check power cable connections
  • Preizkusite vtičnico z drugo napravo

Specifikacije

ZnamkaRCF
Številka modelaEVOX 12
Največja izhodna moč zvočnika1400 vatov
Signal-to-Noise Ratio (SPL)130 dB
Premer nizkotonca15 palcev
Premer visokotonca1 palcev
Tehnologija povezljivostiXLR (žični)
Način avdio izhodaStereo
Vrsta namestitveProstostoječi, pritrditev na kolesa
Dodatne funkcijePortable, Onboard DSP
Vir napajanjaElektrični na kabel
Posebne uporabeEvents and Performances
barvaČrna
Stopnja vodoodpornostiNi vodoodporen

Garancija in podpora

The RCF Evox 12 Portable Array Powered Active Speaker System comes with a 90-dnevna omejena garancija. This warranty covers manufacturing defects under normal use. For warranty claims or technical support, please contact RCF customer service or your authorized dealer. Keep your proof of purchase for warranty validation.

For further assistance, you may visit the official RCF website or consult their online resources for FAQs and additional support documentation.

© 2023 RCF. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.