Uvod
Hvala za nakupasing the SENTRY HPXBT150 Bluetooth Flat Cord Earbuds. This manual provides detailed instructions on how to set up, operate, and maintain your new wireless earbuds. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Vsebina paketa
- SENTRY HPXBT150 Bluetooth Flat Cord Earbuds
- Zaščitna torbica
- Polnilni kabel USB (mikro-USB)
- Removable Ear Hooks
- Uporabniški priročnik
Konec izdelkaview
The SENTRY HPXBT150 earbuds feature Bluetooth wireless technology, allowing for a cord-free listening experience. They include an in-line microphone for hands-free calls and media control buttons for easy operation. Removable ear hooks provide a secure fit, especially during physical activity.
Image: SENTRY HPXBT150 Bluetooth Earbuds showing the in-line control panel and ear hooks. The control panel features volume up/next track, power/multifunction, and volume down/previous track buttons.
Nastavitev
1. Polnjenje slušalk
- Locate the Micro-USB charging port on the in-line control unit.
- Connect the provided USB charging cable to the earbuds' charging port.
- Drugi konec kabla USB priključite v združljiv vir napajanja USB (npr. vrata USB računalnika, stenski adapter USB).
- The LED indicator light will illuminate during charging. It will change color or turn off once charging is complete. A full charge typically takes approximately 1-2 hours.
2. Bluetooth seznanjanje
- Pred prvim seznanjanjem se prepričajte, da so slušalke popolnoma napolnjene.
- Press and hold the multi-function button (usually the center button on the in-line control) for approximately 5-7 seconds until the LED indicator light flashes red and blue alternately. This indicates the earbuds are in pairing mode.
- V napravi, ki podpira Bluetooth (pametni telefon, tablični računalnik, računalnik), pojdite v meni z nastavitvami Bluetooth.
- Omogočite Bluetooth in poiščite razpoložljive naprave.
- Select "HPXBT150" or a similar name from the list of found devices.
- Once successfully paired, the LED indicator on the earbuds will typically flash blue slowly or turn off, and you will hear an audible confirmation.
- Če se od vas zahteva geslo, vnesite »0000«.
Navodila za uporabo
Vklop/izklop
- Vklop: Press and hold the multi-function button for approximately 3 seconds until the LED indicator flashes blue and you hear a power-on tone.
- Ugasniti: Press and hold the multi-function button for approximately 3-5 seconds until the LED indicator flashes red and you hear a power-off tone.
Predvajanje glasbe
- Predvajanje/pavza: Enkrat pritisnite večfunkcijski gumb.
- Povečaj glasnost: Pritisnite gumb '+'.
- Znižaj glasnost: Pritisnite gumb '-'.
- Naslednja skladba: Pritisnite in držite gumb »+«.
- Prejšnja skladba: Pritisnite in držite gumb '-'.
Upravljanje klicev
- Sprejmi/končaj klic: Enkrat pritisnite večfunkcijski gumb.
- Zavrni klic: Pritisnite in držite večfunkcijski gumb približno 2 sekundi.
- Ponovno klicanje zadnje številke: Dvakrat pritisnite večfunkcijski gumb.
Vzdrževanje
- Čiščenje: Za čiščenje ušesnih čepkov uporabite mehko, suho krpo. Ne uporabljajte agresivnih kemikalij ali abrazivnih materialov.
- Shranjevanje: Ko slušalk ne uporabljate, jih shranite v priloženi zaščitni etui, da preprečite poškodbe.
- Vzdrževanje baterije: To preserve battery life, avoid fully discharging the earbuds frequently. Charge them regularly, even if not used for extended periods.
- Izogibajte se vlagi: Slušalke hranite stran od vode in prekomerne vlage.
Odpravljanje težav
| Težava | Možna rešitev |
|---|---|
| Slušalke se ne vklopijo. | Ensure the earbuds are fully charged. Connect to a power source and allow time to charge. |
| Seznanitev z napravo ni mogoča. | Ensure earbuds are in pairing mode (flashing red/blue). Turn off and on Bluetooth on your device. Move earbuds closer to your device. Forget previous pairings on your device and try again. |
| Ni zvoka ali nizka glasnost. | Check volume levels on both the earbuds and your connected device. Ensure earbuds are properly paired. Try re-pairing the earbuds. |
| Prekinjena povezava. | Ensure there are no obstructions between the earbuds and your device. Move closer to your device. Avoid environments with strong Wi-Fi or other wireless interference. |
Specifikacije
- Model: HPXBT150
- Tehnologija povezljivosti: Brezžično (Bluetooth)
- Pogonska enota: 10 mm
- Impedanca: 32+/-3 Ohms
- Občutljivost: 103dB +/- 3dB
- Frekvenčni odziv: 20 Hz - 20 kHz
- Združljive naprave: Phones, Tablets, MP3 Players, Computers, Gaming Consoles
- Vrsta nadzora: Nadzor medijev
- Posebne lastnosti: Microphone Included, USB Connectivity, Removable Ear Hooks
- Teža artikla: 2.08 unč
Varnostne informacije
- Do not expose the earbuds to extreme temperatures, direct sunlight, or fire.
- Do not disassemble or modify the earbuds. This may void the warranty and cause damage.
- Izogibajte se dolgotrajnemu poslušanju pri visoki glasnosti, da preprečite poškodbe sluha.
- Hraniti izven dosega otrok in hišnih ljubljenčkov.
- Izdelek zavrzite odgovorno v skladu z lokalnimi predpisi.
Garancija in podpora
For warranty information and technical support, please refer to the documentation included with your purchase or contact SENTRY customer service directly. Keep your proof of purchase for warranty claims.