Stagg SDI-ST 2-Channel Passive DI Box User Manual

1. Uvod

Hvala, ker ste izbrali Stagg SDI-ST 2-Channel Passive DI Box. This device is designed to convert high-impedance, unbalanced signals from instruments, microphones, or other audio sources into low-impedance, balanced signals suitable for direct connection to mixing consoles, audio interfaces, or other professional audio equipment. Its robust die-cast metal housing ensures durability for stagelektronske, studijske in oddajne aplikacije.

This manual provides essential information for the proper setup, operation, and maintenance of your SDI-ST DI Box. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

2. Izdelek je končanview

Stagg SDI-ST is a passive direct injection box featuring two independent channels, allowing for mono or stereo signal processing. It requires no external power supply.

Slika 1: Stagg SDI-ST 2-Channel Passive DI Box. An angled view od Stagg SDI-ST 2-Channel Passive DI Box, showcasing its black die-cast metal housing, input/output jacks, and switches. The top panel displays the model name and connection diagrams, while the front panel features the input/output jacks and ground lift switches.

2.1. Komponente in krmilniki

• HI-Z IN 1 / HI-Z IN 2: High impedance input jacks (1/4" TS) for connecting instruments, microphones, or other audio sources.
• HI-Z OUT 1 / HI-Z OUT 2: High impedance output jacks (1/4" TS) for routing the original signal to an amplifier or other stage equipment. These act as "thru" outputs.
• LO-Z OUT 1 / LO-Z OUT 2: Low impedance balanced XLR outputs for connecting to mixing consoles or audio interfaces.
• GROUND LIFT 1 / GROUND LIFT 2: Switches to disconnect the ground connection between the input and output, helping to eliminate hum and ground loop noise.
• STEREO/MONO SELECT: A switch to select between stereo (two independent channels) or mono operation (combining both inputs to a single output, typically LO-Z OUT 1).

3. Nastavitev

Follow these steps to properly set up your Stagg SDI-ST DI Box:

1. Poveži vhodni vir: Connect your instrument (e.g., guitar, bass, keyboard) or other audio source to the HI-Z IN 1 or HI-Z IN 2 jack using a standard 1/4" TS instrument cable. For stereo sources, use both inputs.
2. Poveži se z Amplifier (izbirno): If you wish to send the original signal to an on-stage amplifier, povežite HI-Z OUT 1 or HI-Z OUT 2 priključek na tvoje amplifier's input using another 1/4" TS instrument cable.
3. Povezava z mešalnikom/vmesnikom: Povežite LO-Z OUT 1 or LO-Z OUT 2 (XLR outputs) to the balanced XLR input of your mixing console or audio interface using standard XLR cables.
4. Select Stereo/Mono Mode:
   • For independent left and right channels (stereo), ensure the STEREO/MONO SELECT stikalo je v STEREO položaj.
   • To combine both inputs into a single mono output (typically LO-Z OUT 1), set the STEREO/MONO SELECT preklopite na MONO položaj.
5. Dvigalo: Zagotovite GROUND Dvigalo switches are initially in the "grounded" position (usually '0' or down). If you encounter hum or buzz, try engaging the ground lift switch ('I' or up) for the affected channel.

4. Navodila za uporabo

Once connected, the Stagg SDI-ST operates passively, meaning it does not require power and functions by transforming the signal impedance. Here are key operational considerations:

• Pretok signala: The signal from your instrument enters via HI-Z IN. It is then split: one path goes to the HI-Z OUT (for an amplifier), and the other passes through a transformer to become a balanced, low-impedance signal at the LO-Z OUT (for a mixer).
• Odprava ozemljitvene zanke: If you hear a low-frequency hum or buzz, it is often caused by a ground loop. Engage the GROUND Dvigalo switch for the channel experiencing the hum. This disconnects the ground path, which can resolve the issue. If the hum persists, ensure all equipment is properly grounded and try different power outlets.
• Mono vs. Stereo:
  • In STEREO mode, each channel (1 and 2) operates independently. Input 1 goes to Output 1, and Input 2 goes to Output 2.
  • In MONO mode, both Input 1 and Input 2 signals are summed together and sent out through LO-Z OUT 1. LO-Z OUT 2 will typically be inactive or carry a duplicate mono signal depending on the internal wiring. Consult the mixer's input for optimal mono summing.
• Pasivno delovanje: As a passive DI box, the SDI-ST does not boost the signal. The output level will be dependent on the input level. Ensure your source instrument has sufficient output.

5. Vzdrževanje

Stagg SDI-ST DI Box is designed for durability and requires minimal maintenance.

• Čiščenje: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners or solvents, as these can damage the finish.
• Shranjevanje: Store the DI box in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Ravnanje: While the die-cast metal housing is robust, avoid dropping the unit or subjecting it to severe impacts, which could damage internal components.
• Kabelske povezave: Always ensure cables are securely connected but avoid excessive force when plugging or unplugging, which can damage the jacks.

6. Odpravljanje težav

7. Specifikacije

8. Garancija in podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Stagg webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.

For further assistance, you may contact Stagg customer service directly. Contact details are typically available on the manufacturer's webmesto.