Invision HDTV-E
Navodila za uporabo stenskega nosilca Invision Ultra Slim Tilt Swivel TV (HDTV-E)
Model: HDTV-E
Uvod
This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E). Please read all instructions carefully before beginning installation to ensure correct assembly and to prevent damage or injury. Keep this manual for future reference.
Vsebina paketa:
- Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount
- Komplet montažne strojne opreme (različni vijaki, sidra, podložke)
- High Speed HDMI Cable (1080p 1.4v)
- 6-inch Tri-axis Spirit Level
- Navodila za uporabo

Slika 1: Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) components, including the main mount assembly, VESA plate, and accessories like the spirit level and HDMI cable.
Pomembne varnostne informacije
OPOZORILO: Če teh navodil ne preberete in ne upoštevate, lahko pride do resnih telesnih poškodb, materialne škode ali razveljavitve garancije.
- Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and your television.
- Za iskanje lesenih nosilcev vedno uporabite iskalnik stebrov ali pa se prepričajte, da jih montirate v trden beton/opeko.
- Ne prekoračite največje nosilnosti 36.2 kg (80 lbs).
- Ta izdelek je zasnovan samo za uporabo v zaprtih prostorih.
- Ensure all screws are securely tightened, but do not overtighten.
- Med namestitvijo hranite otroke in hišne ljubljenčke proč.
- Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte s usposobljenim strokovnjakom.
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Številka modela | HDTV-E |
| Znamka | Invision |
| Material | Visoko kakovostno jeklo |
| barva | Črna |
| Združljivost velikosti zaslona | 24-55 palcev |
| Združljivost VESA | 100x100mm to 400x400mm (Not suitable for 75x75mm VESA) |
| Največja nosilnost | 36.2 kg (80 lbs) |
| Wall Profile (Min-Max) | 55mm (2.2 inches) to 500mm (19.7 inches) |
| Vrsta gibanja | Nagib, vrtenje |
| Največji kot nagiba | 5 do 8 stopinj |
| Priloženi dodatki | High Speed HDMI Cable, Tri-axis Spirit Level |

Slika 2: Key specifications of the Invision HDTV-E mount, including load capacity (36.2kg), minimum wall profile (55mm), and maximum extension (500mm).
Nastavitev in namestitev
1. Kontrolni seznam pred namestitvijo
- Verify VESA Compatibility: Check the back of your TV for four mounting holes. Measure the horizontal and vertical distance between these holes. This mount supports VESA patterns from 100x100mm to 400x400mm. Note: Not suitable for 75x75mm VESA.
- Vrsta stene: Determine if your wall is wood stud, solid concrete, or brick. Different mounting hardware is required.
- Potrebna orodja: Pencil, drill, stud finder (for wood studs), level (included), measuring tape, socket wrench, screwdriver.
- Weight Check: Ensure your TV's weight does not exceed 36.2kg (80lbs).

Slika 3: Guide to checking VESA compatibility. Measure the distance between mounting holes to determine your TV's VESA pattern. The image illustrates how to measure width and height for VESA standards.
2. Attaching the TV Brackets to Your Television
- Televizor previdno položite z zaslonom navzdol na mehko, čisto površino, da preprečite poškodbe zaslona.
- Identify the correct screws (M4, M6, or M8) from the hardware kit that fit your TV's mounting holes. Use washers if necessary.
- Attach the two vertical TV brackets to the back of your television using the selected screws. Ensure they are securely fastened but do not overtighten. The brackets should be centered horizontally on the TV.
3. Mounting the Wall Plate to the Wall
- Določite višino montaže: Decide on the desired height for the top of your TV. Mark this on the wall.
- Poiščite nosilce (za lesene stene): Use a stud finder to locate the center of two adjacent wood studs. Mark these locations.
- Položaj stenske plošče: Hold the wall plate against the wall at the desired height, aligning it with the marked stud centers. Use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes.
- Vrtanje pilotnih lukenj:
- For wood studs: Drill pilot holes using a 5.5mm (7/32 inch) drill bit to a depth of 60mm (2.36 inches).
- For solid concrete/brick: Drill pilot holes using a 10mm (3/8 inch) drill bit to a depth of 70mm (2.75 inches). Insert concrete anchors into the holes.
- Varna stenska plošča: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten all bolts firmly.
4. Hanging the Television
- S pomočjo previdno dvignite televizor s pritrjenimi nosilci.
- Nosilce televizorja pritrdite na stensko ploščo. Prepričajte se, da je televizor varno nameščen na stenski plošči.
- Engage the safety locking screws or mechanisms on the bottom of the TV brackets to prevent accidental dislodging.
Navodila za uporabo
The Invision HDTV-E mount offers flexible viewing options with its tilt and swivel capabilities.

Slika 4: The mount's design allows for extensive swivel and tilt adjustments, providing optimal viewfotografiranje iz različnih kotov v prostoru.
Prilagoditev vrtenja
Gently grasp the sides of your television and carefully pull it away from the wall. You can then pivot the TV left or right to achieve your desired viewing angle. The mount allows for a wide range of swivel motion, up to 500mm (19.7 inches) extension from the wall.
Prilagoditev nagiba
To adjust the vertical tilt, gently push the top or bottom of the television forward or backward. The mount supports a tilt angle of 5 to 8 degrees. The lockable tilt mechanism ensures the TV stays at your chosen angle.
Upravljanje kablov
The mount features integrated cable management covers on the arms. Route your cables (including the included HDMI cable) through these covers to keep them organized and out of sight, ensuring a clean installation.

Slika 5: Podrobno view of the mount's cable management system and the lockable tilt mechanism, designed for a tidy and secure setup.
Vzdrževanje
- Redni pregled: Periodically check all mounting screws and bolts to ensure they remain tight. Over time, vibrations or adjustments can cause them to loosen slightly.
- Čiščenje: Nosilec očistite z mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom, ki bi lahko poškodovala površino.
- Mazanje: The moving parts of the mount are designed for smooth operation and generally do not require lubrication. If you notice any stiffness, contact customer support.
- Omejitev teže: Never exceed the maximum weight capacity of 36.2kg (80lbs).
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Televizor po namestitvi ni poravnan. | Stenska plošča ni bila nameščena ravno. | Remove TV, loosen wall plate screws, adjust with spirit level, re-tighten. |
| Nosilec se zdi nestabilen. | Screws are loose; wall not suitable; weight exceeded. | Check all screws for tightness. Verify wall type and TV weight. If issues persist, consult a professional. |
| Difficulty adjusting tilt/swivel. | Mechanism might be stiff or overtightened. | Ensure no cables are obstructing movement. Check for any adjustment knobs that might be too tight. Do not force movement. |
| Manjkajoči deli. | Napaka pri pakiranju. | Contact Invision customer support immediately for replacement parts. |
Informacije o garanciji
The Invision Ultra Slim Tilt Swivel TV Wall Bracket Mount (HDTV-E) comes with a 25-letna garancija na izdelek. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.
For warranty claims or further details, please contact Invision customer support.
Podpora uporabnikom
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Invision Technology (UK) Ltd. customer support.
Proizvajalec: Invision Technology (UK) Ltd
Globalna trgovinska identifikacijska številka (GTIN): 05060264551392
Please refer to the product packaging or the official Invision webspletno mesto za najnovejše kontaktne podatke.

Slika 6: Product packaging displaying manufacturer information and contact details for Invision Technology (UK) Ltd.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.