Gmatrix A-TV10 Universal Waterproof Remote Control

Uvod

Welcome to the Gmatrix A-TV10 multi-functional waterproof remote control. This remote is specifically designed for simplicity and ease of use, featuring only six large, essential buttons. Its user-friendly design aims to provide a comfortable and straightforward television control experience, making it an essential household item.

Konec izdelkaview

The Gmatrix A-TV10 remote control is engineered for simplicity and durability. Its robust design includes a waterproof casing and large, clearly labeled buttons for effortless operation.

Slika 1: Spredaj view of the Gmatrix A-TV10 remote control, showcasing its large, clearly labeled buttons and compact design.

Slika 2: Pod kotom view highlighting the ergonomic shape and button layout of the remote control.

Slika 3: stran view illustrating the battery compartment and its secure, waterproof design.

Nastavitev

1. Namestitev baterije

The Gmatrix A-TV10 remote requires two AAA batteries (not included).

1. To open the battery compartment, pull the lanyard while simultaneously pushing the small button located on the back of the remote.
2. Previdno odstranite pokrov baterije.
3. Vstavite dve bateriji AAA in pazite na pravilno polarnost (+/-).
4. Replace the battery cover by aligning it and pushing firmly until it clicks into place, ensuring a secure, waterproof seal.

Opomba: If the remote control does not function after battery installation, ensure the batteries are inserted correctly. If the LED indicator light blinks continuously, replace with new batteries.

2. Programiranje daljinskega upravljalnika

The Gmatrix A-TV10 remote can be programmed using an automatic search method or a learning function. It is compatible with standard televisions or televisions with an inserted direct line cable. It is ni združljivo with cable boxes or satellite receivers.

Method A: Automatic Search (Recommended)

1. Point the A-TV10 remote directly at your television.
2. Pritisnite in držite NASTAVI button for approximately 7 seconds. The indicator light on the remote will illuminate. Release the button.
3. The remote will begin searching for your TV's code. Observe your television screen.
4. As soon as your television turns off, immediately press the NASTAVI button again to save the code.

Pomembno: It is crucial to press the NASTAVI button immediately after the TV turns off. If you delay, the remote may continue searching, and the correct code might be missed.

Method B: Learning Function (for specific buttons)

This function allows the A-TV10 to learn commands from your original TV remote for specific buttons.

1. Pritisnite in držite NASTAVI button for approximately 3 seconds. While still holding NASTAVI, pritisnite in držite GLASNOST+ button for approximately 5 seconds. The indicator light will turn on. Release both buttons. The remote is now in learning mode.
2. Place your original TV remote control and the Gmatrix A-TV10 remote control facing each other, with their infrared emitters aligned, at a distance of 3-5 cm.
3. On your original remote, press the button you wish to teach (e.g., Power). The Gmatrix A-TV10's indicator light will flash three times.
4. Immediately press the corresponding button on the Gmatrix A-TV10 remote (e.g., Power). The indicator light will flash three times again, confirming the code has been learned.
5. Repeat steps 3 and 4 for any other buttons you wish to program using the learning function.
6. To exit learning mode and save the learned codes, press the NASTAVI gumb.

Opomba: If the indicator light flashes three times and then you hold a key for 10 seconds, the learning state will be exited without saving.

Navodila za uporabo

Once programmed, the Gmatrix A-TV10 remote provides simple control over your television with its six large buttons:

• Gumb za vklop (rdeč): Vklopi ali izklopi televizor.
• Gumba GLASNOST+ / GLASNOST-: Prilagodite glasnost navzgor ali navzdol.
• Gumba CH+ / CH-: Preklapljanje kanalov navzgor ali navzdol.
• Gumb za izklop zvoka: Izklopi ali vklopi zvok televizorja.
• Gumb AV: Switches between video input sources (e.g., TV, HDMI, AV).
• SET Button (Red): Used for programming and learning functions. Not for daily TV operation.

Odpravljanje težav

Specifikacije

• Številka modela: A-TV10
• Dimenzije izdelka: 6 x 2 x 1 palcev
• Teža artikla: 3.2 unč
• Potrebne baterije: 2 AAA baterije (niso vključene)
• Tehnologija povezljivosti: Infrardeči
• Združljive naprave: televizija
• Največje število podprtih naprav: 2 (via learning function for specific buttons)
• Posebna lastnost: Universal, Waterproof

Garancija in podpora

For information regarding warranty coverage or technical support for your Gmatrix A-TV10 Universal Waterproof Remote Control, please refer to the product packaging or contact Gmatrix customer service directly. Contact details can typically be found on the manufacturer's official website or within the product's sales documentation.