1. Pomembne varnostne informacije
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- OPOZORILO: Nevarnost električnega udara. Pred namestitvijo ali servisiranjem odklopite napajanje na varovalki ali odklopniku.
- Vse električne povezave morajo biti v skladu z lokalnimi predpisi, odloki ali Nacionalnim električnim kodeksom (NEC).
- Če niste prepričani glede postopkov ožičenja, se posvetujte z usposobljenim električarjem.
- This fixture is designed for outdoor, wet location use. Ensure all connections are properly sealed to prevent water intrusion.
- Ne poskušajte spreminjati vgrajenega LED-vira svetlobe. Ni ga mogoče zamenjati.
2. Vsebina paketa
Pred začetkom namestitve preverite, ali so prisotne vse komponente:
- 1 x VAXCEL Melbourne Post Light Fixture (with integrated LED)
- 1 x Clear Crackle Glass Shade
- Pritrdilni material (vijaki, matice)
3. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Številka modela | T0165 |
| Dimenzije (D x Š x V) | 8 cm x 8 cm x 16 cm |
| Teža | 3.97 funta |
| Material | Legirano jeklo, steklo |
| Vir svetlobe | Integrated LED (6 Watts) |
| Svetlost | 300 lumnov |
| Barvna temperatura | 3000 Kelvinov (toplo bela) |
| Indeks barvnega upodabljanja (CRI) | 82 |
| voltage | 120 volta |
| Posebne lastnosti | Dusk to Dawn Sensor, Exterior Wet Rated |
| Vrsta namestitve | Post Mounted (fits standard 3-inch diameter post, not included) |
4. Navodila za namestitev (Nastavitev)
Before you begin, ensure the power is turned off at the circuit breaker. This fixture is designed to be mounted on a standard 3-inch diameter post (post not included).
- Prepare the Post: Ensure your existing 3-inch diameter post is securely installed and has electrical wiring extending from its top.
- Povežite ožičenje: Carefully connect the fixture's wires to your household electrical wires. Use the provided wire nuts to secure connections:
- Connect the black wire from the fixture to the black (hot) wire from the post.
- Connect the white wire from the fixture to the white (neutral) wire from the post.
- Connect the green or bare copper ground wire from the fixture to the green or bare copper ground wire from the post.
- Namestite napeljavo: Carefully place the fixture onto the top of the 3-inch post, aligning any pre-drilled holes if applicable. Secure the fixture to the post using the provided mounting screws. Do not overtighten.
- Namestite stekleno senčilo: Gently place the clear crackle glass shade into the fixture, ensuring it is seated properly and securely.
- Obnovi moč: Ko je svetilka varno nameščena in so vse povezave vzpostavljene, ponovno vzpostavite napajanje na odklopniku.
5. Navodila za uporabo
The VAXCEL Melbourne Post Light features an integrated dusk-to-dawn photocell sensor for automatic operation. There are no manual controls for this light fixture.
- Samodejni vklop/izklop: The photocell sensor (refer to Figure 3) detects ambient light levels. The fixture will automatically turn on when it gets dark and turn off when it detects sufficient daylight.
- Začetno delovanje: Upon initial power-up, the light may take a few minutes to calibrate or may turn on briefly before turning off if it is daytime. This is normal operation.
6. Vzdrževanje
Regular maintenance will help preserve the appearance and functionality of your VAXCEL Melbourne Post Light.
- Čiščenje: Za čiščenje naprave se prepričajte, da je napajanje izklopljeno. Obrišite z mehko, suho krpo.amp krpo. Ne uporabljajte abrazivnih čistil ali topil, saj lahko poškodujejo površino ali steklo.
- LED svetlobni vir: The LED light source is integrated and designed for long-lasting performance. It is not user-replaceable.
- Fotocelica: Keep the photocell sensor (Figure 3) free from dirt, debris, or obstructions (e.g., leaves, snow) to ensure proper dusk-to-dawn operation.
7. Odpravljanje težav
If your VAXCEL Melbourne Post Light is not functioning as expected, refer to the following common issues and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Luč se ponoči ne prižge. | Brez napajanja na napeljavo. Photocell is obstructed or faulty. Težava z ožičenjem. | Check circuit breaker and wall switch (if applicable). Ensure photocell is clean and not blocked by objects. Verify wiring connections are secure (with power off). |
| Svetloba ostane prižgana čez dan. | Photocell is obstructed or faulty. Insufficient ambient light reaching the sensor. | Ensure photocell is clean and not blocked. Relocate the fixture if it's in a shaded area during the day. |
| Svetloba utripa ali zatemni. | Ohlapna žična povezava. Nihanja moči. | Preverite vse ožičenje (pri izklopljenem napajanju). Consult an electrician if power fluctuations are suspected. |
If these steps do not resolve the issue, please contact VAXCEL customer support.
8. Informacije o garanciji
The VAXCEL Melbourne 1L LED Dusk to Dawn Outdoor Post Light (Model T0165) is covered by a 5-letna omejena garancija from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the VAXCEL official webspletno mesto ali se obrnite na podporo strankam.
9. Kontaktni podatki
For further assistance, technical support, or warranty claims, please contact VAXCEL customer service:
- Webspletno mesto: Visit the VAXCEL Store on Amazon
- Please have your model number (T0165) and proof of purchase ready when contacting support.