Model: WSM-S
Thank you for choosing the Atlantic Mantova Wall Spout. This solid brass fixture, featuring an oil-rubbed bronze finish, is designed to enhance outdoor water features with a consistent water flow. This manual provides essential information for the proper installation, operation, and maintenance of your wall spout to ensure optimal performance and longevity.
Always follow local electrical and plumbing codes. Disconnect power to all equipment before installation or maintenance. Ensure proper grounding for all electrical components in your water feature system. If you are unsure about any installation steps, consult a qualified professional.
Carefully remove the Mantova Wall Spout from its packaging. Inspect for any damage. Retain packaging for future storage or transport.
The wall spout is designed for integration into hardscape walls or similar structures. Ensure the chosen location allows for proper water flow into a basin or pond and provides adequate support for the spout and plumbing.
Image 1: Atlantic Mantova Wall Spout installed in a stone wall, showing water flowing into a basin.
Image 2: Multiple Atlantic Mantova Wall Spouts creating a water feature.
The wall spout includes a grounding lug. For bonded systems, connect a grounding wire to this lug according to local electrical codes. This is crucial for safety in water features with electrical components.
If installing an Atlantic Spout Light (sold separately), thread it into a 1-inch threaded tee from the back of the wall spout before final installation. Ensure all electrical connections for the light are waterproof and meet safety standards.
Image 3: Mantova Wall Spout with an optional Spout Light, showing illuminated water flow.
The recommended flow rate for the Mantova Wall Spout is 600 GPH to achieve a smooth, consistent stream. Adjust your pump's flow rate or use a flow control valve to achieve the desired effect. Excessive flow may cause splashing, while insufficient flow may result in an uneven stream.
After installation and filling your water feature, turn on the pump. Allow water to circulate through the system and purge any air. Check all connections for leaks and adjust the water flow as needed.
Periodically inspect the wall spout for debris, mineral buildup, or algae. Clean the spout using a soft brush and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the oil-rubbed bronze finish.
In freezing climates, it is essential to drain the water feature and remove the wall spout (if possible) or ensure all water is completely drained from the spout and associated plumbing to prevent ice damage. Store the spout in a dry, protected area during winter months.
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Uneven or weak water flow |
|
|
| Puščanje vode iz priključkov |
|
|
| Razbarvanje končne obdelave |
|
|
| Funkcija | Podrobnost |
|---|---|
| Znamka | Atlantski vodni vrtovi |
| Številka modela | WSM-S |
| Material | Medenina |
| Vrsta zaključka | Bron, brušen z oljem |
| Teža predmeta | 3 funta |
| Vhodni priključek | 1.5-inch FIPT |
| Priporočen pretok | 600 GPH |
| Vključene komponente | Lug za ozemljitev |
Ta izdelek je zajet v a 1-letna garancija proizvajalca. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the Atlantic Water Gardens official webmesto.
For technical assistance, replacement parts, or warranty claims, please contact Atlantic Water Gardens customer support. Visit their official webspletno mesto za kontaktne podatke.
Ta videoposnetek ponuja konecview of Atlantic Wall Spouts, including the Mantova model, demonstrating their aesthetic appeal and water flow characteristics in various outdoor settings. It highlights how these spouts can be integrated into different water features and shows the effect of optional lighting.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.