Steba 39.18.00

Uporabniški priročnik za hitri grelec Steba BS-1800

Model: BS-1800 (39.18.00)

Uvod

Thank you for choosing the Steba BS-1800 Quick Heater. This manual provides essential information for the safe and efficient operation of your new appliance. Please read all instructions carefully before installation and use, and retain this manual for future reference.

The Steba BS-1800 is an energy-saving quick heater designed for bathroom use, featuring a programmable timer, motion sensor, and touch controls for enhanced comfort and efficiency.

Steba BS-1800 Quick Heater front view z digitalnim prikazom

Slika: spredaj view of the Steba BS-1800 Quick Heater, showcasing its sleek white design and integrated digital display with touch controls.

Pomembna varnostna navodila

Pri uporabi električnih naprav vedno upoštevajte osnovne varnostne ukrepe, da zmanjšate tveganje požara, električnega udara in poškodb oseb.

  • Pred uporabo tega grelnika preberite vsa navodila.
  • Ta grelnik je med uporabo vroč. Da se izognete opeklinam, ne pustite, da se gola koža dotika vročih površin.
  • Izjemna previdnost je potrebna, kadar grelnik uporabljajo otroci ali invalidi ali v njegovi bližini in kadar koli grelnik pustite delovati brez nadzora.
  • Ne uporabljajte grelnika s poškodovanim kablom ali vtičem ali po tem, ko je grelec padel ali kakor koli poškodovan.
  • Do not use outdoors. This heater is intended for indoor, bathroom use only.
  • Če želite odklopiti grelec, izklopite krmilne elemente in nato odstranite vtič iz vtičnice.
  • Ne vstavljajte ali dovolite, da bi tujki vstopili v prezračevalne ali izpušne odprtine, saj lahko povzročijo električni udar ali požar ali poškodujejo grelec.
  • Da bi preprečili morebiten požar, na kakršen koli način ne blokirajte dovodov ali odvodov zraka.
  • Ta grelec ima v notranjosti vroče dele, ki povzročajo oblok ali iskre. Ne uporabljajte ga v prostorih, kjer se uporabljajo ali shranjujejo bencin, barve ali vnetljive tekočine.
  • Ta grelnik uporabljajte samo tako, kot je opisano v tem priročniku. Kakršna koli druga uporaba, ki je ne priporoča proizvajalec, lahko povzroči požar, električni udar ali telesne poškodbe.
  • This appliance is splash-proof (IP24 rated) and suitable for bathroom installation, but must not be installed directly above a bath or shower.

Nastavitev in namestitev

The Steba BS-1800 Quick Heater is designed for wall-mounted installation. Ensure the mounting location is suitable and adheres to local electrical and safety regulations.

Mesto namestitve

  • Choose a wall location that is clear of obstructions and allows for proper air circulation.
  • Ensure the wall material can support the weight of the heater (approximately 4.84 pounds).
  • Maintain a safe distance from water sources, as per IP24 rating guidelines for bathroom appliances.

Koraki namestitve

  1. Carefully unpack the heater and all accessories. Inspect for any damage.
  2. Using the provided mounting template (if included) or by measuring the heater's dimensions, mark the drilling points on the wall. Refer to the dimensions diagram below.
  3. Drill holes and insert appropriate wall plugs (not always included, depending on wall type).
  4. Montažni nosilec pritrdite na steno.
  5. Previdno obesite grelec na nosilec in se prepričajte, da je varno pritrjen.
  6. Connect the power plug to a suitable electrical outlet. Ensure the outlet is properly grounded and rated for the heater's power requirements.
Diagram showing dimensions of Steba BS-1800 heater: 49 cm height, 30 cm width, 10 cm depth

Image: Dimensional diagram of the Steba BS-1800 heater, indicating a height of 49 cm, width of 30 cm, and depth of 10 cm for precise installation planning.

Nazaj view of the Steba BS-1800 Quick Heater, showing mounting points and air intake

Slika: Zadaj view of the Steba BS-1800 Quick Heater, illustrating the design for wall mounting and the location of the air intake vent.

Navodila za uporabo

The Steba BS-1800 features intuitive touch controls and various modes for optimal heating.

Nadzorna plošča je končanaview

The front panel features a digital display and touch-sensitive buttons for power, mode selection, temperature adjustment, and timer settings.

Osnovno delovanje

  1. Vklop/izklop: Press the power button (usually indicated by a circle with a vertical line) to turn the heater on or off.
  2. Prilagoditev temperature: Use the up/down arrows to set your desired room temperature. The heater features a stepless adjustable room thermostat.
  3. Izbira načina: Press the 'mode' button to cycle through available operating modes.

Napredne funkcije

  • Programabilni časovnik: Set the timer for a daily hot bath or specific heating periods. Consult the display for timer programming options.
  • Senzor gibanja: The integrated motion sensor detects presence and can activate an ECO mode, reducing energy consumption when no movement is detected.
  • ECO način: This energy-saving mode automatically adjusts heating output based on motion detection, optimizing power usage.
  • Zaznavanje odprtega okna: The heater can detect open windows and temporarily suspend heating to prevent energy waste.
  • Način zaščite pred zmrzaljo: This mode maintains a minimum temperature to prevent freezing in the room.
Graphic illustrating Steba BS-1800 features: motion detection, open window detection, frost protection mode, and timer

Image: A graphic highlighting key features of the Steba BS-1800, including motion detection, open window detection, frost protection mode, and a programmable timer for individual weekday scheduling.

Steba BS-1800 Quick Heater in a bathroom setting, warming a towel

Image: The Steba BS-1800 Quick Heater installed in a modern bathroom, demonstrating its function as a towel warmer, providing practical comfort.

Vzdrževanje

Regular maintenance ensures the longevity and efficient operation of your Steba BS-1800 Quick Heater.

Čiščenje

  • Pred čiščenjem vedno izključite grelec iz električnega omrežja in ga pustite, da se popolnoma ohladi.
  • Obrišite zunanje površine z mehko damp krpo. Ne uporabljajte abrazivnih čistil ali topil.
  • Pazite, da voda ne pride v notranje komponente.

Vzdrževanje filtra

The heater may contain a washable, removable filter. Regularly check and clean the filter to maintain optimal airflow and heating efficiency.

  • Locate the filter access point (typically on the side or rear of the unit).
  • Remove the filter and gently clean it with a soft brush or rinse under lukewarm water.
  • Preden filter ponovno vstavite v grelec, ga pustite, da se popolnoma posuši.

Odpravljanje težav

If you encounter issues with your Steba BS-1800 Quick Heater, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Grelec se ne vklopi.No power supply; power button not pressed; overheating protection activated.Check power outlet and plug connection. Press power button. Allow unit to cool down if overheating protection was triggered.
Grelec proizvaja premalo toplote.Temperature setting too low; air intake/exhaust blocked; dirty filter.Increase temperature setting. Ensure clear airflow around the unit. Clean the air filter.
Senzor gibanja se ne odziva.Sensor obstructed; incorrect mode selected.Ensure sensor is clear of obstructions. Verify the heater is in a mode that utilizes the motion sensor.
Nenavadni zvoki ali vonji.Kopičenje prahu; težava z notranjimi komponentami.Unplug immediately. Clean the unit. If problem persists, discontinue use and contact customer support.

If the problem persists after attempting these solutions, please contact Steba customer support for assistance.

Specifikacije

FunkcijaPodrobnost
Številka modela39.18.00 (BS-1800)
Dimenzije izdelka3.94 x 11.81 x 19.29 palcev (10 x 30 x 49 cm)
Teža predmeta4.84 funtov
ProizvajalecSteba
ASINB00NEKCDX0
Lastnosti močiProgrammable timer, Motion sensor, ECO mode, Stepless adjustable room thermostat
Varnostne funkcijeOverheating protection, Splash-proof (IP24), Open window detection, Frost protection mode
Vrsta nadzoraTouch control with display
NamestitevMontaža na steno

Garancija in podpora

Specific warranty details are not provided in the product information. For warranty claims, technical support, or service inquiries, please contact Steba customer service directly or refer to the warranty card included with your purchase.

Keep your purchase receipt as proof of purchase for any warranty-related matters.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.