Uvod
Hvala za nakupasing the Adesso Trio Floor Lamp, Model 4305-22. This versatile floor lamp je zasnovan tako, da zagotavlja ample lighting and convenient storage solutions within a compact footprint. Featuring three individual lights with pull chain switches and two clear acrylic shelves, it enhances any room with both style and functionality. Please read this manual thoroughly before assembly and use to ensure safe and proper operation.
Figure 1: Adesso Trio Floor Lamp, Model 4305-22
Varnostne informacije
- Always disconnect the power supply before cleaning, changing bulbs, or performing any maintenance.
- Uporabljajte samo žarnice navedene vrste in moči.tage (three 40W incandescent or equivalent CFL/LED bulbs). Exceeding the maximum wattage can create a fire hazard.
- Ta lamp is intended for indoor use only. Do not expose to moisture or extreme temperatures.
- Zagotovite lamp postavljen je na stabilno, ravno površino, da se prepreči prevrnitev.
- Keep the electrical cord away from heat sources, sharp edges, and wet areas.
- The clear acrylic shelves are for light decorative items or storage. Do not place heavy objects on them (maximum weight capacity per shelf is approximately 1.5 lbs).
Vsebina paketa
Pred začetkom montaže preverite, ali so prisotni vsi sestavni deli:
- Lamp Base (Brushed Steel)
- Vertical Poles (3 sections per pole, total 3 poles)
- White Linen Cylindrical Shades (3 pieces)
- Clear Acrylic Shelves (2 pieces)
- Pull Chain Switches (3 pieces, pre-attached to lamp vtičnice)
- Hardware Pack (screws, washers, etc., if applicable)
- Napajalni kabel
Postavitev in montaža
Follow these steps to assemble your Adesso Trio Floor Lamp. No special tools are required.
- Razpakirajte komponente: Vse dele previdno vzemite iz embalaže in jih položite na čisto, mehko površino, da preprečite praske.
- Sestavljanje palic: Connect the vertical pole sections by gently twisting them clockwise until secure. Ensure the wiring passes freely through the poles.
- Pritrdite osnovo: Securely attach the assembled poles to the brushed steel lamp osnova.
- Namestite police: Slide the two clear acrylic shelves onto the poles at the desired heights. The shelves are designed to fit snugly between the pole sections.
- Priloži Lamp Vtičnice: Ensure the three lamp sockets with pre-attached pull chains are securely fastened to the top of each pole.
- Place Shades: Carefully place each white linen cylindrical shade over its respective lamp vtičnica.
- Vstavite žarnice: Screw three 40-watt incandescent or equivalent CFL/LED bulbs (not included) into the lamp vtičnice. Ne zategujte preveč.
- Položaj Lamp: Postavite lamp in its desired location, ensuring the power cord is not pinched or obstructed.
Slika 2: Detajl lamp's base and shades.
Navodila za uporabo
- Napajalni priključek: Priključite lamp's clear power cord into a standard electrical outlet. The lamp is smart outlet compatible for integration with smart home systems.
- Vklop/izklop: Each of the three lights is controlled by its own pull chain switch. Pull the chain once to turn the light on, and pull it again to turn it off. This allows for customizable lighting, enabling you to illuminate one, two, or all three lights as needed.
Figure 3: Key features of the Adesso Trio Floor Lamp.
Vzdrževanje
- Čiščenje: Za čiščenje lamp, ensure it is unplugged. Wipe the brushed steel base and poles with a soft, dry cloth. For the white linen shades, use a lint roller or a soft brush to remove dust. The clear acrylic shelves can be wiped with a damp cloth and mild soap, then dried thoroughly. Avoid abrasive cleaners.
- Zamenjava žarnice: Vedno izključite lamp before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with three 40-watt incandescent or equivalent CFL/LED bulbs.
Odpravljanje težav
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Lamp se ne vklopi. | 1. Lamp ni priključen. 2. Bulb is loose or burnt out. 3. Električna vtičnica ne deluje. | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten or replace the bulb(s). 3. Test the outlet with another device or check your circuit breaker. |
| Svetloba utripa. | 1. Ohlapna žarnica. 2. Incorrect bulb type/wattage. 3. Okvarjena žarnica. | 1. Tighten the bulb(s). 2. Ensure bulbs meet specifications (40W incandescent or equivalent CFL/LED). 3. Replace the flickering bulb. |
| Lamp je nestabilen. | 1. Not on a level surface. 2. Poles not fully tightened. | 1. Premaknite lamp na ravno, stabilno površino. 2. Re-tighten all pole connections. |
Specifikacije
- Številka modela: 4305-22
- Dimenzije (D x Š x V): 11.7"D x 14"Š x 68"V
- Teža artikla: 15.2 funta
- Vrsta materiala: Metal (Brushed Steel Base), Linen (Shades), Acrylic (Shelves)
- Barva senčila: Bela
- Število svetlobnih virov: 3
- Podnožje žarnice: E26 Srednje
- Wattage: Max 40 watts per bulb (Incandescent or equivalent CFL/LED)
- Vrsta stikala: Pull Chain (3 individual switches)
- vir energije: Električni na kabel
- Dolžina kabla: Približno 5 čevljev (60 palcev)
- Vrsta namestitve: Samostoječ
- Notranja/zunanja uporaba: Samo v zaprtih prostorih
Figure 4: Dimensions of the Adesso Trio Floor Lamp.
Informacije o garanciji
Manufacturer Warranty Description: N/a.
For specific warranty details or to inquire about product guarantees, please refer to the documentation provided at the time of purchase or contact the retailer directly.
Podpora uporabnikom
If you have any questions, require assistance with assembly, or encounter issues not covered in this manual, please contact the retailer where you purchased the product or visit the official Adesso webmesto za podporne vire.
Adesso Official Webspletno mesto: www.adessohome.com