TecTake 401163 TV Wall Mount Instruction Manual

1. Uvod

Thank you for choosing the TecTake 401163 Tilting TV Wall Mount. This manual provides essential information for the safe and correct installation and use of your new wall mount. Please read these instructions carefully before beginning installation and retain them for future reference.

2. Varnostne informacije

• Ensure the wall structure can safely support the combined weight of the mount and the display. Consult a professional if unsure.
• Ne prekoračite največje nosilnosti 100 kg (220 lbs).
• Med namestitvijo vedno uporabljajte ustrezno varnostno opremo, vključno z zaščito za oči.
• Med namestitvijo naj se otroci in hišni ljubljenčki ne zadržujejo v delovnem območju.
• Verify that no electrical wires or plumbing are present in the drilling area.
• Tighten all screws firmly but do not overtighten to avoid stripping threads or damaging components.
• Ta izdelek je zasnovan samo za uporabo v zaprtih prostorih.

3. Vsebina paketa

Please check that all components are present and undamaged before installation. If any parts are missing or damaged, contact TecTake customer support.

• TecTake 401163 TV Wall Mount (pre-assembled)
• Complete Mounting Hardware Kit (screws, anchors, washers, spirit level)
• Detailed and Illustrated Assembly Instructions (this manual)

Figure 3.1: Included Mounting Hardware

4. Specifikacije

Figure 4.1: Technical Dimensions

5. Nastavitev in namestitev

Follow these steps for a secure installation. It is recommended to have two people for installation, especially when mounting the display.

1. Pripravite TV: Attach the pre-assembled mount brackets to the back of your television using the appropriate screws from the mounting hardware kit. Ensure the VESA holes on your TV match the mount's compatibility (50x50mm to 400x400mm). Make sure no connectors on the TV are covered by the mount.
2. Mark Wall Drilling Points: Hold the wall plate of the mount against the desired position on your wall. Use a pencil to mark the drilling points through the holes on the wall plate. Use the included spirit level to ensure the marks are perfectly horizontal.
3. Vrtanje lukenj: Drill holes at the marked points on the wall. The drill bit size will depend on the type of wall and the anchors you are using. Insert the appropriate wall anchors into the drilled holes.
4. Stenska plošča za montažo: Securely screw the wall plate to the wall using the appropriate screws and washers from the hardware kit. Ensure it is firmly attached and level.
5. Obesite televizor: Carefully lift the television (with the attached brackets) and hook the brackets onto the wall plate. Ensure the TV is securely seated on the wall mount.
6. Zavarujte televizor: Use the safety screws or locking mechanisms (if present on your specific model) to secure the TV to the wall mount, preventing accidental dislodgement.

Figure 5.1: Assembled Wall Mount

Slika 5.2: stran View of Wall Mount

6. Delovanje

This wall mount features a fixed design with a tilting capability. Once the TV is mounted, you can adjust the tilt angle to achieve the optimal viewing experience. The tilt mechanism allows for a slight downward angle, which can help reduce glare from overhead lighting.

• Prilagoditev nagiba: Gently push or pull the bottom of the TV to adjust the tilt angle. The mount is designed for smooth, continuous adjustment within its specified range.

7. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varnost vašega stenskega nosilca.

• Čiščenje: Nosilec obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Periodični pregledi: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or movement can cause screws to loosen.
• Pregled škode: Inspect the mount for any signs of damage or wear. If any damage is found, discontinue use and contact customer support.

8. Odpravljanje težav

If you encounter issues during or after installation, refer to these common solutions.

• TV ni raven: Ensure the wall plate is perfectly level before drilling. If the TV is already mounted, you may need to slightly adjust the wall plate or use shims if minor adjustments are needed. Re-check all connections.
• Nosilec se zdi ohlapen: Re-tighten all screws securing the wall plate to the wall and the brackets to the TV. Ensure you are using appropriate anchors for your wall type.
• Difficulty Tilting: Check for any obstructions behind the TV. Ensure the tilt mechanism is not overtightened (if applicable) or damaged.
• Manjkajoči deli: Refer to the 'Package Contents' section. If parts are missing, contact TecTake customer support immediately.

9. Garancija in podpora

TecTake products are designed for quality and durability. For information regarding warranty coverage and customer support, please refer to your purchase documentation or visit the official TecTake webmesto.

Politika vračila: This product is typically eligible for a refund or replacement within 30 days of purchase, subject to the retailer's return policy.

For further assistance, please contact TecTake customer service.