Wheelock WHST-H15

Wheelock WHST-H15 Paging Horn Instruction Manual

Model: WHST-H15

1. Uvod

This instruction manual provides essential information for the proper installation, operation, and maintenance of the Wheelock WHST-H15 Paging Horn. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and efficient performance. Retain this manual for future reference.

2. Varnostne informacije

OPOZORILO:

  • Namestitev in ožičenje mora izvesti usposobljeno osebje v skladu z vsemi lokalnimi in nacionalnimi električnimi predpisi.
  • Disconnect power before installing or servicing the device to prevent electric shock.
  • Ensure the mounting surface can adequately support the weight of the paging horn.
  • Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
  • Uporabljajte samo določeno količinotage inputs (25V, 70V, 100V) to avoid damage to the unit.

3. Vsebina paketa

Po razpakiranju preverite, ali so vse komponente prisotne in nepoškodovane:

  • Wheelock WHST-H15 Paging Horn (1 unit)
  • Adjustable Mounting Bracket (pre-attached or separate)
  • Installation Hardware (screws, washers, nuts - quantity may vary)
  • Ta priročnik z navodili

4. Nastavitev in namestitev

The Wheelock WHST-H15 Paging Horn is designed for versatile installation with its adjustable, weatherproof mounting. It supports 25V, 70V, and 100V audio systems.

Wheelock WHST-H15 Paging Horn with adjustable mounting bracket

Figure 1: Wheelock WHST-H15 Paging Horn. This image displays the Wheelock WHST-H15 Paging Horn, featuring its conical speaker and an adjustable mounting bracket at the base. The horn is designed for clear audio projection in various environments.

4.1 Mounting the Paging Horn

  1. Izberite lokacijo: Choose a suitable mounting location that provides optimal sound coverage and is structurally sound. Consider the weatherproof design for outdoor applications.
  2. Varni nosilec: If the mounting bracket is separate, attach it securely to the chosen surface using appropriate hardware. Ensure it is level and stable.
  3. Attach Horn: Mount the paging horn to the bracket. Use the adjustable mechanism to orient the horn for desired sound direction. Tighten all fasteners to prevent movement.

4.2 Žične povezave

The WHST-H15 supports 25V, 70V, and 100V constant voltage audio systems. It also features a 15W power rating.

  1. Izbira moči: Poiščite voltage selector switch or terminals on the horn. Set it to match your audio system's output voltage (25V, 70V, or 100V). Incorrect voltagIzbira lahko poškoduje enoto.
  2. Connect Audio Lines: Connect the audio input lines from your amplifier or paging system to the designated terminals on the horn. Observe correct polarity (+/-).
  3. Varne povezave: Ensure all wiring connections are tight and properly insulated to prevent short circuits and ensure reliable operation.

5. Navodila za uporabo

Once installed and wired correctly, the Wheelock WHST-H15 Paging Horn operates in conjunction with your connected audio system.

  1. Vklop: Apply power to your audio amplifier or paging system.
  2. Testni zvok: Initiate a test page or audio signal through your system.
  3. Adjust Volume/Direction: If necessary, adjust the output volume from your amplifier. The horn's direction can be fine-tuned using its adjustable mounting bracket.

Note: The WHST-H15 is a passive device and does not have its own volume control. Volume adjustments are made at the audio source.

6. Vzdrževanje

The Wheelock WHST-H15 Paging Horn requires minimal maintenance to ensure long-term performance.

  • Redni pregled: Periodically inspect the horn and its mounting bracket for any signs of damage, corrosion, or loose connections.
  • Čiščenje: Clean the exterior of the horn with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no moisture enters the internal components.
  • Varstvo okolja: While weatherproof, extreme environmental conditions may necessitate more frequent checks.

7. Odpravljanje težav

If you encounter issues with your Wheelock WHST-H15 Paging Horn, refer to the following common problems and solutions:

TežavaMožen vzrokrešitev
Ni zvoka
  • Brez moči za amplifier
  • Nepravilno ožičenje
  • Nepravilna voltage izbor
  • Poškodovan rog
  • Preverite ampnapajalnik lifier
  • Preverite vse priključke in polarnost ožičenja
  • Zagotovite voltage selector matches system voltage
  • Contact Wheelock support if horn is damaged
Distorted or low sound
  • Nepravilna voltage izbor
  • Amplifier output too low/high
  • Zrahljane povezave
  • Preverite voltage selector setting
  • Prilagodi ampvolumen lifierja
  • Preverite in zavarujte vse kabelske povezave
Horn not securely mounted
  • Ohlapna montažna oprema
  • Nepravilna namestitev
  • Tighten all screws and bolts on the mounting bracket
  • Re-evaluate mounting location and method

8. Specifikacije

ZnamkaWheelock
ModelWHST-H15
Nazivna moč15 vatov
voltage Združljivost25V, 70V, 100V (selectable)
MontažaNastavljiv nosilec
OkoljskiOdporen na vremenske vplive
barvaBež
Dimenzije izdelka (DxŠxV)11 x 11 x 11 palcev
Teža predmeta0.01 unč
Prvič na voljo21. november 2013

9. Garancija in podpora

For warranty information and technical support, please refer to the official Wheelock webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Shranite račun kot dokazilo o nakupu.

Wheelock Customer Support: Visit Eaton's Wheelock Webmesto

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.