PORTER-CABLE PCC601 20V MAX Lithium Ion Drill Driver User Manual

Konec izdelkaview

The PORTER-CABLE PCC601 20V MAX Lithium Ion Drill Driver is a lightweight and compact tool designed for various drilling and driving tasks. Its high-performance motor and two-speed gearbox provide the necessary power for efficient operation. The integrated bright LED light illuminates the work area, enhancing visibility.

Slika 1: Spredaj view of the Porter Cable PCC601 Drill Driver.

Pomembne varnostne informacije

Vedno preberite in razumite vsa varnostna opozorila, navodila, ilustracije in specifikacije, ki so priložene temu električnemu orodju. Neupoštevanje vseh spodnjih navodil lahko povzroči električni udar, požar in/ali hude poškodbe.

• Nosite ustrezno osebno zaščitno opremo, vključno z zaščito za oči, zaščito za sluh in rokavicami.
• Poskrbite, da bo delovno območje čisto in dobro osvetljeno. Nered ali temna območja lahko povzročijo nesreče.
• Električnega orodja ne uporabljajte v eksplozivnem okolju, na primer v prisotnosti vnetljivih tekočin, plinov ali prahu.
• Med uporabo električnega orodja naj se otroci in navzoče osebe ne približujejo. Motnje lahko povzročijo izgubo nadzora.
• Use only PORTER-CABLE 20V MAX batteries with this tool.
• Always remove the battery pack before making any adjustments, changing accessories, or storing the power tool.

Komponente in funkcije

Familiarize yourself with the key components of your PCC601 Drill Driver:

• Brezključna vpenjalna glava: Za hitro in enostavno menjavo nastavkov.
• Torque Collar: Adjusts the amount of torque for different applications.
• Stikalo za izbiro hitrosti: Allows selection between two speed ranges (High/Low).
• Stikalo naprej/nazaj: Nadzira smer vrtenja.
• Sprožilec s spremenljivo hitrostjo: Controls the drilling/driving speed.
• LED delovna luč: Osvetljuje delovno površino.
• Gumb za sprostitev baterije: Za odstranitev baterijskega sklopa.
• Držalo za nastavke: Convenient storage for a single bit.

Slika 2: stran view of the Porter Cable PCC601 Drill Driver, highlighting its compact design.

Slika 3: Zgornji del view of the drill driver, showing the speed selector switch.

Nastavitev

Namestitev in odstranitev baterije

1. To install the battery: Align the battery pack with the slot in the tool's handle. Slide the battery pack into the handle until it clicks securely into place.
2. To remove the battery: Press the battery release button located on the front of the battery pack and pull the battery pack out of the handle.

Note: Battery and charger are sold separately. Ensure the battery is fully charged before first use.

Namestitev in odstranitev bitov

1. To install a bit: Rotate the chuck counter-clockwise until the jaws are open wide enough to insert the bit. Insert the bit fully into the chuck. Rotate the chuck clockwise to tighten the jaws securely around the bit.
2. To remove a bit: Rotate the chuck counter-clockwise to loosen the jaws and remove the bit.

Navodila za uporabo

Izbira hitrosti

The drill driver features a two-speed gearbox. Use the speed selector switch located on top of the tool to choose between:

• Hitrost 1 (nizka): For high torque applications, such as driving screws or drilling large diameter holes.
• Hitrost 2 (visoka): For high speed applications, such as drilling small diameter holes.

Delovanje naprej/nazaj

The forward/reverse switch controls the direction of the chuck rotation. Push the switch to the left for forward rotation (drilling/driving) and to the right for reverse rotation (removing screws/bits). Center the switch for the lock-off position, which prevents accidental starting.

Sprožilec s spremenljivo hitrostjo

The variable speed trigger allows you to control the operating speed. Press the trigger lightly for slower speeds and increase pressure for higher speeds. This provides precise control for various tasks.

Prilagoditev navora

The torque collar has multiple settings to prevent overdriving screws or damaging materials. Rotate the collar to select the desired torque setting. Higher numbers indicate higher torque. The drill symbol indicates drill mode for maximum torque.

Vzdrževanje

• Čiščenje: Keep the tool's air vents clean and free of debris to ensure proper motor cooling. Use a soft, damp krpo za čiščenje. Ne uporabljajte agresivnih kemikalij ali abrazivnih čistil.
• Mazanje: To orodje je tovarniško namazano in ne potrebuje dodatnega mazanja.
• Vzdrževanje baterije: Akumulatorske baterije shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe in ekstremnih temperatur.
• Pregled: Regularly inspect the chuck, power cord (if applicable), and housing for any damage. Replace damaged parts immediately.

Odpravljanje težav

Specifikacije

• Model: PCC601
• voltage: 20 voltov MAX
• Velikost vpenjalne glave: 1/2 palca (13 mm)
• Hitrost brez obremenitve: 0–350 vrt/min (nizko), 0–2000 vrt/min (visoko)
• Teža artikla: 2.5 lbs (samo orodje)
• Dimenzije izdelka: 8.25 cm D x 7 cm Š x 3 cm V
• vir energije: Baterija (litij-ionska)
• Posebna lastnost: Chuck brez ključa
• Material: Plastika, jeklo

Figure 4: Product label displaying model and basic specifications.

Garancija in podpora

For warranty information and customer support, please refer to the official PORTER-CABLE webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Račun shranite kot dokazilo o nakupu za morebitne garancijske zahtevke.

Spletna podpora: www.portercable.com/support