Seiko QHR024S Digital Alarm Clock Instruction Manual

Uvod

This manual provides detailed instructions for the setup, operation, and maintenance of your Seiko QHR024S Digital Alarm Clock. Please read this manual thoroughly before using your clock to ensure proper function and longevity. Keep this manual for future reference.

Konec izdelkaview

The Seiko QHR024S is a modern digital alarm clock featuring a clear LCD display, radio wave control for accurate timekeeping, and essential functions like alarm, snooze, and temperature display.

Ključne značilnosti:

• Digitalni zaslon
• Prikaz koledarja
• Funkcija dremeža
• Prikaz temperature
• Funkcija alarma
• Quartz, Atomic Movement
• Illumination (Backlight)
• Global Radio Wave Control

Identifikacija komponente:

The image displays the front view of the Seiko QHR024S Digital Alarm Clock. The large LCD screen shows the time (e.g., 10:08:59), date (e.g., 10/25), and temperature (e.g., 76.5°F). Indicators for Daylight Saving Time (DST), USA time zone, and radio wave reception are also visible. To the right of the display are the control buttons: 'SNOOZE LIGHT' at the top, 'ALM/TIME SET' in the middle, and 'UP' and 'DOWN' arrow buttons below it. The 'SEIKO' logo is printed on the bottom left, and 'GLOBAL RADIO WAVE CONTROL' is printed on the bottom right.

Refer to the image above for the location of the following components:

• LCD zaslon: Shows time, date, temperature, and various indicators.
• SNOOZE LIGHT Button: Activates snooze function and backlight.
• ALM/TIME SET Button: Uporablja se za vstop v načine nastavitve časa in alarma.
• Gumb GOR: Adjusts values upwards during setting.
• Gumb DOL: Adjusts values downwards during setting.

Nastavitev

1. Namestitev baterije

1. Poiščite pokrovček predalčka za baterije na zadnji strani ure.
2. Remove the cover by sliding or unlatching it.
3. Insert one (1) LR44 battery, ensuring the polarity (+/-) matches the diagram inside the compartment.
4. Varno namestite pokrov prostora za baterije.

Note: An LR44 battery is typically included with your purchase.

2. Začetni vklop in sprejem radijskih valov

Upon battery installation, the clock will power on and automatically attempt to receive the time signal from the nearest atomic clock transmitter. This process may take several minutes to several hours depending on your location and environmental conditions.

• Place the clock near a window, away from electronic devices that may cause interference.
• The radio wave indicator on the display will flash during reception and become solid once synchronized.
• If reception is poor, try repositioning the clock. Manual time setting is available if automatic synchronization is not successful.

Navodila za uporabo

1. Ročna nastavitev časa in datuma

1. Pritisnite in držite ALM/TIME SET gumb, dokler prikaz časa ne začne utripati.
2. Uporabite UP or DOL gumbe za nastavitev ure. Pritisnite ALM/TIME SET za potrditev in premik na minute.
3. Repeat this process for minutes, year, month, and date.
4. Po nastavitvi datuma pritisnite ALM/TIME SET za izhod iz nastavitvenega načina.

2. Nastavitev alarma

1. Pritisnite ALM/TIME SET button once briefly to display the current alarm time.
2. While the alarm time is displayed, press and hold ALM/TIME SET dokler ne utripa ura budilke.
3. Uporabite UP or DOL gumbe za nastavitev ure budilke. Pritisnite ALM/TIME SET to confirm and move to alarm minutes.
4. Adjust alarm minutes using UP or DOL. Pritisnite ALM/TIME SET za potrditev in izhod iz nastavitve alarma.
5. Za vklop ali izklop alarma pritisnite ALM/TIME SET button briefly to show the alarm time, then press UP or DOL to toggle the alarm ON/OFF indicator.

3. Funkcija dremeža in osvetlitve ozadja

Ko se oglasi alarm, pritisnite tipko LUČKA ZA DREMENJE button to temporarily stop the alarm. The alarm will sound again after a few minutes (typical snooze duration is 5-10 minutes). Pressing any other button will turn off the alarm until the next set time.

Pritisnite LUČKA ZA DREMENJE button at any time to activate the backlight for a few seconds, illuminating the display for easy viewv slabih svetlobnih pogojih.

4. Prikaz temperature

The clock displays the ambient temperature. The unit of temperature (Celsius or Fahrenheit) can typically be switched via a small button or switch located on the back or side of the clock. Refer to the physical unit for the exact location of this control.

5. Poletni čas (DST)

The Seiko QHR024S, with its Global Radio Wave Control feature, is designed to automatically adjust for Daylight Saving Time. Ensure the DST indicator is correctly set (usually automatic) or manually adjust if necessary during time setting.

Vzdrževanje

1. Čiščenje

To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the casing ali zaslon.

2. Zamenjava baterije

When the display becomes dim or the clock functions erratically, it is time to replace the battery. Follow the battery installation steps outlined in the