Uvod
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Teka Baltic Sport Shower Set model 790026700. Please read this manual carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Varnostne informacije
- Pred začetkom kakršnih koli montažnih ali vzdrževalnih del vedno izklopite glavni dovod vode.
- Prepričajte se, da so vse povezave varne, da preprečite puščanje.
- Na kromirani površini ne uporabljajte abrazivnih čistil ali agresivnih kemikalij, saj lahko to povzroči poškodbe.
- Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte z usposobljenim vodovodarjem.
Vsebina paketa
Pred začetkom namestitve preverite, ali so vse komponente prisotne:
- Shower Set (including shower head, hose, and rail)
- Montažna oprema
- Priročnik za namestitev (ta dokument)
Nastavitev in namestitev
Follow these steps for proper installation of your Teka Baltic Sport Shower Set:
- Pripravite območje namestitve: Turn off the main water supply. Clear the area where the shower set will be installed.
- Mount the Shower Rail: Position the shower rail on the wall at the desired height. Mark the drilling points for the mounting brackets. Drill holes and insert wall plugs. Secure the mounting brackets to the wall using the provided screws.
- Attach the Shower Rail: Slide the shower rail onto the mounted brackets and secure it according to the specific design of your rail.
- Priključite cev za tuš: Attach one end of the 175 cm braided steel hose to the shower mixer outlet (not included) and the other end to the shower head. Ensure all connections are hand-tightened, then use a wrench to gently tighten further, being careful not to overtighten.
- Place the Shower Head: Insert the shower head into the adjustable holder on the shower rail.
- Test za puščanje: Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connections slightly until they stop.
Image 1: The complete Teka Baltic Sport Shower Set, including the shower rail, adjustable holder, and round shower head, ready for installation. This image illustrates the components that need to be assembled and mounted on the wall.
Navodila za uporabo
The Teka Baltic Sport Shower Set is designed for ease of use:
- Adjusting Water Flow and Temperature: Use your existing shower mixer (not included) to control the water flow and temperature.
- Uporaba tuš glave: The round shower head features an anti-limescale system. Water sprays from multiple nozzles.
- Nastavitev višine tuš glave: The shower head holder on the rail can be easily adjusted up or down to suit individual preferences. Simply press the release button or lever on the holder and slide it to the desired position.
Image 2: A close-up front view of the Teka Baltic Sport round shower head, showcasing its multiple nozzles and anti-limescale design.
Slika 3: Stran A view of the Teka Baltic Sport shower head, highlighting its ergonomic handle and chrome finish.
Vzdrževanje
Regular cleaning and maintenance will ensure the longevity and appearance of your shower set:
- Čiščenje kromirane površine: Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry immediately to prevent water spots.
- Sistem proti vodnemu kamnu: The shower head is equipped with an anti-limescale system. Periodically rub the rubber nozzles on the shower head to dislodge any mineral deposits. For stubborn deposits, a solution of white vinegar and water can be used, but ensure it is rinsed off completely.
- Vzdrževanje cevi: Inspect the braided steel hose periodically for any signs of wear or damage. Replace if necessary.
Odpravljanje težav
Tukaj so rešitve za pogoste težave, na katere lahko naletite:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Low water pressure from shower head | Zamašene šobe ali nabiranje mineralov. | Clean the shower head nozzles by rubbing them to remove limescale. If necessary, soak the shower head in a descaling solution. |
| Puščanje vode iz priključkov | Ohlapne povezave ali obrabljene podložke. | Ensure all connections are tightened properly. Check and replace any worn rubber washers. |
| Shower head not staying in position | Holder mechanism is loose or worn. | Tighten the holder mechanism if possible. If worn, the holder may need replacement. |
Specifikacije
| Funkcija | Podrobnost |
|---|---|
| Znamka | Teka |
| Številka modela | 790026700 |
| barva | Chrome |
| Vrsta zaključka | Kromirano |
| Število ročajev | 1 (for shower mixer, not included) |
| Teža predmeta | 5.8 kilogramov |
| Dolžina cevi | 175 cm (Braided Steel) |
| GTIN | 08413509203667 |
| Proizvajalec | Teka |
Garancija in podpora
For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Teka webspletnega mesta. Shranite dokazilo o nakupu za morebitne garancijske zahtevke.