Eiko 43A/CL/H-120V

Eiko Halogen A19 43W Clear 120V Bulb User Manual

Model: 43A/CL/H-120V

1. Pomembne varnostne informacije

Please read all instructions carefully before installing or using this Eiko Halogen A19 bulb. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Nevarnost električnega udara: Pred namestitvijo, odstranitvijo ali pregledom vedno izklopite napajanje svetilke na odklopniku ali v omarici z varovalkami.
  • Nevarnost opeklin: Halogen bulbs operate at high temperatures. Do not touch the bulb while it is operating or immediately after it has been turned off. Allow the bulb to cool completely before handling.
  • Pravilno odstranjevanje: Rabljene žarnice zavrzite v skladu z lokalnimi predpisi.
  • Samo notranja uporaba: Ta žarnica je zasnovana za notranjo uporabo v ustreznih svetilkah.
  • Do Not Exceed Wattage: Ensure the fixture's maximum wattage rating is not exceeded. This bulb is 43W.
  • Ravnajte previdno: Avoid touching the glass portion of the bulb with bare hands, as oils can reduce bulb life. Use a clean cloth or gloves if necessary.

2. Nastavitev in namestitev

Follow these steps to safely install your Eiko Halogen A19 bulb:

  1. Izklopite napajanje: Locate the light fixture's power switch and turn it to the "OFF" position. For added safety, turn off the power at the main circuit breaker or fuse box.
  2. Dovoli hlajenje: If replacing an existing bulb, ensure it has cooled down completely before touching it.
  3. Odstranite staro žarnico: Carefully unscrew the old bulb counter-clockwise from the socket.
  4. Preglejte pritrditev: Check the light fixture's socket for any damage or debris. Ensure it is clean and dry.
  5. Namestite novo žarnico: Gently screw the Eiko Halogen A19 bulb clockwise into the socket until it is snug. Do not overtighten.
  6. Obnovi moč: Turn the power back on at the circuit breaker or fuse box, then turn on the light switch.
Eiko Halogen A19 43W Clear 120V Bulb

Image 1: Eiko Halogen A19 43W Clear 120V Bulb. This image shows the clear glass bulb with a standard screw-in base, typical of an A19 shape.

3. Navodila za uporabo

The Eiko Halogen A19 bulb operates like a standard incandescent bulb. Once installed, simply use the light fixture's switch to turn the bulb on or off.

  • Takojšnji vklop: The bulb provides instant full brightness upon activation.
  • Kakovost svetlobe: This halogen bulb produces a brighter, whiter light compared to traditional incandescent bulbs, enhancing visibility and color rendition.
  • Zatemnitev: If used in a dimmable fixture with a compatible dimmer switch, this bulb can be dimmed. Ensure your dimmer is rated for halogen or incandescent loads.

4. Vzdrževanje

Minimal maintenance is required for your Eiko Halogen A19 bulb. However, following these guidelines can help ensure optimal performance and longevity:

  • Čiščenje: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
  • Zamenjava: Halogen bulbs, like all light sources, will dim over time and eventually burn out. For consistent light output, consider replacing bulbs when a noticeable decrease in brightness occurs. It is often recommended to replace bulbs in multi-bulb fixtures at the same time for uniform light.
  • Ravnanje: When replacing, avoid touching the new bulb's glass with bare hands. Oils from your skin can create hot spots and reduce bulb life. Use a clean cloth or gloves.

5. Odpravljanje težav

If your Eiko Halogen A19 bulb is not functioning as expected, refer to the following common issues and solutions:

TežavaMožen vzrokrešitev
Žarnica ne sveti.
  • Brez napajanja na napeljavo.
  • Žarnica ni pravilno privita.
  • Bulb is faulty or has reached end of life.
  • Fixture switch is off.
  • Preverite odklopnik/varovalko.
  • Ensure bulb is securely screwed into the socket (power off first).
  • Zamenjajte žarnico z novo.
  • Turn on the fixture switch.
Žarnica utripa.
  • Ohlapna povezava v vtičnici.
  • Nezdružljivo zatemnilno stikalo.
  • voltage nihanja.
  • Turn off power, then tighten the bulb.
  • Ensure dimmer is compatible with halogen bulbs.
  • Če pride do volumna, se posvetujte z električarjem.tagTežave vztrajajo.
Žarnica hitro pregori.
  • Prevečtage za napeljavo.
  • Pogosti prenapetosti.
  • Prekomerne vibracije.
  • Dotikanje stekla z golimi rokami med namestitvijo.
  • Verify fixture's maximum wattage.
  • Razmislite o prenapetostni zaščiti za tokokrog.
  • Prepričajte se, da je pritrdilni element stabilen.
  • Handle new bulbs with a cloth or gloves.

6. Specifikacije izdelka

Detailed specifications for the Eiko Halogen A19 43W Clear 120V bulb:

  • Znamka: Eiko
  • Številka modela: 43A/CL/H-120V
  • Vrsta svetlobe: halogen
  • Wattage: 43 vatov
  • Velikost oblike žarnice: A19
  • voltage: 120 volta
  • Barvna temperatura: 2900 Kelvinov
  • Končaj: jasno
  • Material: Tungsten (filament)
  • Dimenzije izdelka: Približno 1 x 1 x 2.7 palca
  • Teža artikla: Približno 3.2 unč
  • Posebne uporabe: General purpose lighting, lamps

7. Garancija in podpora

7.1. Omejena garancija

Eiko products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship under normal use. The specific duration and terms of the warranty may vary. Please retain your proof of purchase for warranty claims.

7.2. Podpora strankam

For technical assistance, warranty inquiries, or further information regarding your Eiko Halogen A19 bulb, please contact Eiko customer support. Refer to the official Eiko webNajnovejše kontaktne podatke najdete na spletnem mestu ali embalaži izdelka.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.