LD Systems LDWSECO2X2R2 Double Receiver User Manual

Uvod

Thank you for choosing the LD Systems LDWSECO2X2R2 Double Receiver. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and keep it for future reference.

Pomembna varnostna navodila

• Preberite ta navodila: Pred uporabo izdelka preberite vsa varnostna navodila in navodila za uporabo.
• Keep these instructions: Varnostna navodila in navodila za uporabo shranite za prihodnjo uporabo.
• Upoštevajte vsa opozorila: Upoštevajte vsa opozorila na izdelku in v navodilih za uporabo.
• Sledite vsem navodilom: Upoštevati je treba vsa navodila za delovanje in uporabo.
• Te naprave ne uporabljajte v bližini vode: Tega izdelka ne uporabljajte v bližini vode ali vlage.
• Clean only with dry cloth: Pred čiščenjem izključite ta izdelek iz stenske vtičnice.
• Prezračevanje: Ne blokirajte prezračevalnih odprtin. Namestite v skladu z navodili proizvajalca.
• Viri napajanja: Operate this product only from the type of power source indicated on the marking label.
• Servisiranje: Izdelka ne poskušajte servisirati sami, saj vas lahko odpiranje ali odstranjevanje pokrovov izpostavi nevarni voltage ali druge nevarnosti. Za vse servise se obrnite na usposobljeno servisno osebje.

Vsebina paketa

Prosimo, preverite, ali so v vašem paketu priloženi vsi spodaj navedeni artikli:

• LD Systems LDWSECO2X2R2 Double Receiver Unit
• Power Adapter (12-18V DC, 300mA)
• Uporabniški priročnik (ta dokument)
• Antennas (quantity may vary based on model variant)

Konec izdelkaview

The LD Systems LDWSECO2X2R2 is a double receiver designed for wireless audio transmission. It operates on frequencies 863.900 MHz and 864.900 MHz, providing reliable signal reception for professional audio applications.

Slika: spredaj view of the LD Systems LDWSECO2X2R2 Double Receiver, showing controls and display.

Nadzor sprednje plošče:

• Gumb za vklop: Vklopi ali izklopi enoto.
• Prikaz kanala: Shows the currently selected channel for each receiver.
• Nadzor glasnosti: Independent volume adjustment for each receiver channel.
• RF/AF Indicators: LEDs indicating RF signal presence and AF audio level.

Priključki na zadnji plošči:

• Antenski vhodi: Priključite priložene antene.
• Uravnoteženi XLR izhodi: For connecting to professional audio mixers or amposvežilci.
• Unbalanced 1/4" Jack Outputs: Alternative audio output connections.
• Vhod DC moči: Priključite priloženi napajalnik.

Vodnik za namestitev

Follow these steps to set up your LD Systems LDWSECO2X2R2 Double Receiver:

1. Unpack the Receiver: Previdno odstranite vse komponente iz embalaže.
2. Povežite antene: Screw the supplied antennas onto the antenna inputs located on the rear panel. Ensure they are securely fastened.
3. Postavite sprejemnik: Place the receiver in a stable location, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure good line-of-sight to the intended transmitter.
4. Connect Audio Outputs:
   • For balanced connections, use XLR cables to connect the receiver's XLR outputs to your mixer or amplifier.
   • For unbalanced connections, use 1/4" jack cables to connect the receiver's 1/4" outputs to your audio equipment.
5. Priključite napajanje: Connect the provided DC power adapter to the receiver's DC power input. Plug the adapter into a suitable power outlet.
6. Vklop: Press the power button on the front panel to turn on the receiver. The display should illuminate.
7. Pair with Transmitters: Refer to your transmitter's manual for instructions on how to pair it with the receiver. Ensure the transmitter and receiver are set to the same frequency/channel.

Navodila za uporabo

1. Vklop: Ensure both the receiver and your wireless transmitters are powered on.
2. Preverite signal: Observe the RF (Radio Frequency) indicator on the receiver. It should illuminate steadily when a signal from the paired transmitter is detected.
3. Prilagodi glasnost: Use the independent volume controls on the front panel to set the desired audio output level for each channel. Start with a low volume and gradually increase it to avoid sudden loud sounds.
4. Nadzor zvoka: The AF (Audio Frequency) indicator will light up when audio is being received. Ensure your audio equipment (mixer, amplifier) is also properly configured to receive the signal.
5. Channel Selection (if applicable): If your model supports manual channel selection, refer to the specific instructions for changing frequencies to avoid interference. The LDWSECO2X2R2 operates on fixed frequencies 863.900 MHz and 864.900 MHz.
6. Ugasniti: When finished, power off your transmitters first, then power off the receiver.

Vzdrževanje

• Čiščenje: Pred čiščenjem izključite napajanje. Za brisanje zunanjosti sprejemnika uporabite mehko, suho krpo. Ne uporabljajte tekočih čistil ali aerosolnih razpršil.
• Shranjevanje: When not in use for extended periods, store the receiver in a cool, dry place, away from direct sunlight and extreme temperatures.
• Antene: Ensure antennas are not bent or damaged. Replace if necessary to maintain optimal signal reception.
• Napajalnik: Regularly inspect the power adapter and cable for any signs of damage. Do not use a damaged adapter.

Odpravljanje težav

Specifikacije

Garancija in podpora

LD Systems products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official LD Systems website. For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your local dealer or the LD Systems customer service department.

Opomba: Informacije o razpoložljivosti rezervnih delov niso navedene v podrobnostih izdelka.