Audio-Technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable

Uvod

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

Ključne značilnosti:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

Vsebina paketa

• AT-LP60 Turntable Unit
• Pokrov proti prahu
• Pladenj s pogonskim jermenom
• Slip Mat
• 45 RPM adapter
• RCA avdio kabel
• Napajalni adapter

Navodila za namestitev

1. Razpakiranje: Previdno odstranite vse komponente iz embalaže. Embalažo shranite za kasnejši transport ali shranjevanje.
2. Namestitev krožnika: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. Namestitev pasu: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Place the felt slip mat on top of the platter.
5. Pritrditev zaščitnega pokrova za prah: Attach the hinged dust cover to the back of the turntable.
6. Zvočna povezava: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. Napajalni priključek: Napajalnik priključite na gramofon in nato v stensko vtičnico.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

Navodila za uporabo

1. Vklop: Ensure the turntable is connected to power and your audio system is on.
2. Krajevni zapis: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. Select Record Size: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. Izberite hitrost: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. Start Playback (Automatic): Pritisnite START button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. Stop Playback (Automatic): Pritisnite STOP button. The tonearm will automatically lift, return to its rest, and the platter will stop spinning.
7. Manual Cueing: To manually place the stylus, use the DVIGALO TONARMA lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

Vzdrževanje

• Pokrov proti prahu: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• Nega pisala: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• Turntable Body: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Zamenjava jermena: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

Odpravljanje težav

• Brez napajanja: Ensure the power adapter is securely connected to both the turntable and a working electrical outlet.
• Brez zvoka ali nizek zvok:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Check the volume level on your audio system.
• Preskakovanje ali popačenje zvoka:
  • Clean the record thoroughly.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • Ensure the turntable is placed on a stable, level surface.
• Platter Not Spinning:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

Specifikacije

Garancija in podpora

The Audio-Technica AT-LP60 turntable comes with a 1 leta garancije od datuma nakupa. Prosimo, shranite dokazilo o nakupu za uveljavljanje garancije.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official webspletnega mesta ali kontaktnih podatkov, navedenih na embalaži izdelka.

You can also visit the official Audio-Technica webspletno mesto za pogosta vprašanja, dodatne vire in registracijo izdelkov.