Navodila za uporabo osnovnega stojala za svetilko ProMaster LS1(N) (model 9245)

Uvod

The ProMaster LS1(N) light stand is a basic, lightweight stand designed for supporting smaller studio lights, LED panels, or camera-mounted flashes. This manual provides essential information for its safe and effective use.

Ključne značilnosti

• Lahka in prenosna oblika.
• Adjustable height for versatile lighting setups.
• Standard 1/4-inch screw mount for broad compatibility with various lighting equipment.
• Trpežna konstrukcija iz aluminijeve zlitine.
• Stable tripod base.

Navodila za namestitev

Follow these steps to correctly set up your ProMaster LS1(N) Basic Light Stand:

1. Unpack the light stand from its carrying bag.
2. Stojalo postavite na ravno, stabilno površino.
3. Gently spread the tripod legs until they are fully extended and stable.
4. Loosen the locking knobs on each section of the central column.
5. Extend the central column to the desired height.
6. Tighten all locking knobs securely to prevent slippage.
7. Attach your lighting equipment to the 1/4-inch screw mount at the top of the stand. Ensure it is securely fastened.

Figure 1: The ProMaster LS1(N) light stand shown fully extended with its tripod legs spread for stability.

Navodila za uporabo

The ProMaster LS1(N) light stand offers simple adjustments for optimal lighting.

Prilagoditev višine

1. To adjust the height, loosen the locking knobs on the central column sections.
2. Carefully raise or lower the sections to achieve the desired height.
3. Always re-tighten all locking knobs firmly after adjustment to ensure stability.

Pritrjevanje dodatkov

The top of the stand features a universal 1/4-inch screw mount.

1. Screw your light, camera, or other compatible accessory onto this mount.
2. Ensure the accessory is tightened securely to prevent accidental detachment.

Slika 2: Posnetek od blizu view of the ProMaster LS1(N) light stand's top mount with a studio light attached, demonstrating its compatibility.

Nega in vzdrževanje

• Regularly inspect all locking mechanisms and screws for tightness.
• Stojalo očistite z mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom.
• Store the stand in its carrying bag in a dry, cool place when not in use to protect it from dust and damage.
• Do not overload the stand beyond its recommended weight capacity.

Odpravljanje težav

Nestabilnost stoje

• Ensure all tripod legs are fully extended and evenly spread.
• Verify that all locking knobs are securely tightened.
• If using heavy equipment, consider adding sandbags to the base for increased stability.

Težave pri nastavljanju višine

• Check that all locking knobs are sufficiently loosened before attempting to adjust the height.
• Ensure no debris is obstructing the telescoping sections.

Specifikacije izdelka

Garancija in podpora

For warranty information or technical support regarding your ProMaster LS1(N) Basic Light Stand, please refer to the official ProMaster webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Shranite račun kot dokazilo o nakupu.