Uvod
Thank you for choosing the QFX S15 Universal PA Tripod Speaker Stand. This stand is designed to provide stable and adjustable support for your PA speakers, enhancing sound projection and optimizing your audio setup. Constructed from aluminum, it offers durability and portability. Please read this manual thoroughly before assembly and use to ensure proper operation and safety.
Image: The QFX S15 Universal PA Tripod Speaker Stand, shown fully extended with its black finish and sturdy tripod base.
Varnostne informacije
To prevent injury or damage to your equipment, observe the following safety precautions:
- Nosilnost: Do not exceed the maximum load capacity of 80 lbs (36.2 kg). Overloading can cause instability and collapse.
- Stabilna površina: Always place the stand on a flat, level, and stable surface. Uneven surfaces can lead to tipping.
- Leg Spread: Ensure the tripod legs are fully extended and locked into position to maximize stability.
- Montaža zvočnika: Securely mount the speaker onto the stand's pole. Ensure it is centered and balanced.
- Prilagoditve: Make height adjustments carefully. Always loosen adjustment knobs before moving the pole and tighten them securely afterward.
- Ovire: Keep the area around the stand clear to prevent accidental bumps or trips.
- Otroci in hišni ljubljenčki: Keep children and pets away from the stand, especially during setup and adjustment.
- Pregled: Regularly inspect the stand for any signs of wear, damage, or loose components. Do not use if damaged.
Vsebina paketa
Preverite, ali so v paketu prisotne vse komponente:
- 1 x QFX S15 Universal PA Tripod Speaker Stand
If any parts are missing or damaged, please contact QFX customer support.
Navodila za namestitev
Follow these steps to set up your QFX S15 Speaker Stand:
- Razgrnite noge: Place the stand on a flat, stable surface. Gently pull the tripod legs outwards until they are fully extended and form a wide, stable base. Ensure the leg brace is locked into position.
- Prilagodi višino: Loosen the height adjustment knob located on the main pole. Carefully extend the inner pole to the desired height. Do not extend beyond the maximum height indicator (if present) or to a point where stability is compromised.
- Secure Height: Once the desired height is reached, firmly tighten the height adjustment knob to lock the inner pole in place. Ensure there is no wobble.
- Montaža zvočnika: Carefully lift your PA speaker and align its mounting socket with the top pole of the stand. Lower the speaker onto the pole, ensuring it sits securely and is centered.
- Končno preverjanje: Gently shake the stand to confirm stability. If there is any instability, re-check all connections and adjustments.
Navodila za uporabo
The QFX S15 stand is designed for straightforward operation:
- Nastavitev višine: To change the speaker height, first remove the speaker from the stand for safety. Loosen the height adjustment knob, set the pole to the new desired height, and then firmly re-tighten the knob. Re-mount the speaker.
- Prenosljivost: For transport or storage, remove the speaker, loosen the height adjustment knob to retract the inner pole, and then fold the tripod legs inwards. Secure any loose parts.
Vzdrževanje
Proper maintenance ensures the longevity and safe operation of your speaker stand:
- Čiščenje: Wipe the stand with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp krpo in blagim milom, nato pa temeljito posušite. Izogibajte se abrazivnim čistilom ali topilom.
- Shranjevanje: Store the stand in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure it is fully collapsed and secured to prevent accidental unfolding.
- Pregled: Periodically check all bolts, screws, and adjustment knobs for tightness. Inspect the aluminum tubing and plastic components for any cracks, bends, or damage. Replace any worn or damaged parts immediately.
Odpravljanje težav
If you encounter issues with your speaker stand, refer to the following common problems and solutions:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Stojalo je nestabilno ali majavo. | Legs not fully extended or locked; uneven surface; adjustment knob loose; overloaded. | Ensure legs are fully spread and locked. Move to a flat, level surface. Tighten all adjustment knobs. Verify speaker weight does not exceed 80 lbs. |
| Težave pri nastavljanju višine. | Adjustment knob too tight; inner pole stuck. | Loosen the adjustment knob completely. Apply gentle, even pressure to the pole. Ensure no debris is obstructing movement. |
| Speaker does not sit securely on the pole. | Speaker mounting socket is not compatible or damaged; speaker not centered. | Ensure your speaker has a standard 35mm pole mount. Center the speaker carefully. If the socket is damaged, do not use the stand. |
If the problem persists, contact QFX customer support.
Specifikacije
| Znamka | QFX |
| Številka modela | S-15 |
| Material | Aluminum construction (main frame), Plastic (connectors/knobs) |
| barva | Črna |
| Nastavljiva višina | 46 palca do 72 palca (116.8 cm do 182.9 cm) |
| Nosilnost | 80 lbs (36.2 kg) |
| Premer pola | 1.38 palcev (35 mm) |
| Teža predmeta | 5.15 funtov (2.34 kg) |
| Mere izdelka (D x Š x V) | 72"L x 1.38"W x 72"H (fully extended) |
| Fit Vrsta | Univerzalno prileganje |
| UPC | 606540012208 |
Garancija in podpora
Garancija: The QFX S15 Speaker Stand comes with a 1-letna garancija proizvajalca from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or exceeding the stated load capacity.
Podpora strankam: For technical assistance, warranty claims, or to inquire about replacement parts, please visit the official QFX webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Za natančne kontaktne podatke glejte dokumentacijo o nakupu.
Spletni viri: Za dodatne informacije in posodobitve izdelkov obiščite QFX Store on Amazon.
