Pro-Ject Audio - Phono Box DC

Uvod

This manual provides essential information for the proper setup, operation, and maintenance of your Pro-Ject Audio Phono Box DC. This compact phono preamplifier is designed to enhance the audio signal from your turntable, making it compatible with line-level inputs on your amplifier or receiver. It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges, offering versatility for various turntable setups.

Slika 1: Spredaj view of the Pro-Ject Audio Phono Box DC in black.

Varnostne informacije

• Pred čiščenjem ali če enote dalj časa ne boste uporabljali, vedno izključite napajalnik.
• Do not expose the unit to rain or moisture. Avoid placing objects filled with liquid, such as vases, on the unit.
• Zagotovite ustrezno prezračevanje. Ne blokirajte prezračevalnih odprtin.
• Napravo postavite na stabilno, ravno površino, da preprečite nenamerne padce.
• Izogibajte se postavljanju enote v bližino virov toplote, kot so radiatorji, grelniki, štedilniki ali druge naprave (vključno amplifiers), ki proizvajajo toploto.
• Uporabljajte samo napajalnik, ki ga je zagotovil proizvajalec.
• Ne poskušajte servisirati enote sami. Vsa servisna dela prepustite usposobljenemu serviserju.

Vsebina paketa

Prosimo, preverite, ali vaš paket vsebuje naslednje predmete:

• Pro-Ject Audio Phono Box DC unit
• DC power adapter (18V)
• Navodila za uporabo

Če kateri koli predmet manjka ali je poškodovan, se nemudoma obrnite na prodajalca.

Nastavitev

Follow these steps to correctly set up your Phono Box DC:

1. Umestitev: Position the Phono Box DC near your turntable and amplifier. Its compact size allows for flexible placement.
2. Cartridge Type Selection: Locate the MM/MC switch on the rear panel of the Phono Box DC. Set it according to your turntable's cartridge type (Moving Magnet or Moving Coil). Ensure this is set correctly for optimal sound quality.
3. Connect Turntable to Input: Connect the RCA output cables from your turntable to the "In" (Left and Right) RCA inputs on the rear of the Phono Box DC.
4. Povežite ozemljitveno žico: Connect the ground wire from your turntable to the ground terminal on the Phono Box DC. This is crucial for minimizing hum and noise.
5. Connect Output to Ampdvigalo: Connect the "Out" (Left and Right) RCA outputs from the Phono Box DC to a line-level input on your amplifier or receiver (e.g., "Aux", "CD", "Line In"). Do NOT connect it to an amplifier's dedicated "Phono" input, as this would result in over-amplification and distortion.
6. Priključite napajanje: Connect the supplied 18V DC power adapter to the "Power 18V===" input on the rear of the Phono Box DC, then plug the adapter into a suitable power outlet.

Slika 2: Zadaj view showing input, output, MM/MC switch, ground terminal, and power input.

Delovanje

Once all connections are made and the power is supplied, the Phono Box DC is ready for operation. There are no additional controls on the unit beyond the MM/MC switch. Simply select the correct cartridge type, and the unit will automatically process the audio signal from your turntable.

• Zagotovite si amplifier is set to the correct input channel where the Phono Box DC is connected.
• Prilagodite glasnost s svojim ampkrmilniki rešilca.

Vzdrževanje

The Pro-Ject Audio Phono Box DC requires minimal maintenance:

• Čiščenje: Za čiščenje zunanjosti enote uporabite mehko, suho krpo. Ne uporabljajte tekočih čistil ali topil.
• Prah: Keep the unit free from dust accumulation, which can affect performance and lifespan.
• Povezave: Občasno preverite vse kabelske povezave, da se prepričate, da so varne in brez korozije.

Odpravljanje težav

If you encounter issues with your Phono Box DC, refer to the following common problems and solutions:

Specifikacije

Informacije o garanciji

Pro-Ject Audio Systems products are covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, it is recommended to visit the official Pro-Ject Audio Systems webspletnega mesta ali se obrnite na pooblaščenega prodajalca.

Podpora

Should you require further assistance or have questions not covered in this manual, please contact:

• Your authorized Pro-Ject Audio Systems retailer.
• Pro-Ject Audio Systems customer support via their official webspletno mesto: www.project-audio.com

Ko se obrnete na podporo, imejte pripravljeno številko modela izdelka (13072) in podatke o nakupu.