K'NEX CYBERBUGS Dragonfly Building Set

Uvod

This manual provides instructions for assembling and operating your K'NEX CYBERBUGS Dragonfly building set. This set allows you to construct three different moving models: the Dragonfly, Geartram, K'Bot, and Chomper, utilizing the included power pack motor.

Varnostne informacije

This product is intended for children aged 4 years and up. Adult supervision is recommended during assembly and play. Keep small parts away from younger children to prevent choking hazards.

Vsebina paketa

Pred začetkom montaže preverite, ali so vse komponente prisotne.

• K'NEX building pieces for CYBERBUGS Dragonfly models
• Power Pack Motor (requires 2 AA batteries, not included)
• Navodila za uporabo (ta dokument)

Nastavitev

Battery Installation for Power Pack Motor

1. Locate the battery compartment on the Power Pack Motor.
2. Z majhnim križnim izvijačem (ni priložen) odprite pokrov predalčka za baterije.
3. Insert two (2) AA batteries (not included) into the compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Ponovno namestite pokrov prostora za baterije in ga pritrdite z vijakom.

Image: K'NEX CYBERBUGS Dragonfly building set packaging. This image displays the box art for the K'NEX CYBERBUGS Dragonfly set, featuring the various models that can be constructed, including the Dragonfly, Geartram, K'Bot, and Chomper, highlighting the moving capabilities of the toys.

Navodila za gradnjo

The K'NEX CYBERBUGS Dragonfly set allows for the construction of multiple dynamic models. Refer to the included visual guides for step-by-step assembly of each specific model.

Razpoložljivi modeli:

• Dragonfly: A winged insect model designed for motion.
• Geartram: A wheeled vehicle model incorporating gears for movement.
• K'Bot: A robotic figure model with articulated movement.
• Chomper: A creature model featuring a biting or chomping action.

You are encouraged to use your creativity to design and build your own unique moving models using the K'NEX pieces provided.

Navodila za uporabo

Once your model is fully assembled and batteries are installed in the Power Pack Motor, connect the motor to the designated K'NEX parts as shown in the building guide for your chosen model. Activate the motor using its switch to observe your creation in motion.

Vzdrževanje

To ensure the longevity of your K'NEX set:

• Store K'NEX pieces in a clean, dry place away from direct sunlight and extreme temperatures.
• Clean pieces with a damp cloth if necessary. Do not immerse the Power Pack Motor in water.
• Remove batteries from the Power Pack Motor if the toy will not be used for an extended period to prevent battery leakage.

Odpravljanje težav

• Model not moving:
  • Check if the Power Pack Motor is switched ON.
  • Verify that batteries are correctly installed and are not depleted. Replace if necessary.
  • Ensure all K'NEX connections are secure and the motor is properly attached to the model.
  • Check for any obstructions preventing movement of the model's parts.
• Deli, ki ne ustrezajo:
  • Refer to the building instructions to ensure correct piece selection and orientation.
  • Apply gentle, firm pressure. Do not force pieces together.

Specifikacije

Garancija in podpora

For information regarding product warranty or to obtain support, please refer to the manufacturer's official webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Kontaktne podatke običajno najdete na embalaži izdelka ali na proizvajalčevem webmesto.