ORE International 6336F Floating Shade Floor Lamp Uporabniški priročnik

Uvod

This manual provides essential instructions for the safe assembly, operation, and maintenance of your ORE International 6336F Floating Shade Floor LampPred namestitvijo natančno preberite ta priročnik in ga shranite za poznejšo uporabo.

The ORE International 6336F is a modern floor lamp featuring a rectangular white linen shade, a brushed nickel body stand, and an espresso wooden base. It is designed for indoor use and includes an on/off step switch.

Pomembna varnostna navodila

• Preberite vsa navodila: Before assembling or using this lamp, carefully read and understand all instructions.
• Električna varnost: Ensure the power supply is disconnected before assembly, installation, or maintenance. Use only the specified bulb type and wattage.
• Samo notranja uporaba: Ta lamp is designed for indoor use in dry locations. Do not expose to water or moisture.
• Stabilna postavitev: Postavite lamp na ravno in stabilno površino, da preprečite prevračanje.
• Varnost kabla: Do not run the power cord under carpets or in areas where it can be tripped over or damaged. Keep the cord away from heat sources.
• Ravnanje z žarnicami: Allow bulbs to cool before touching or replacing. Do not exceed the maximum wattage naveden na lamp.
• Čiščenje: Clean with a soft, dry cloth. Do not use liquid or abrasive cleaners.
• UL na seznamu: Ta izdelek ima certifikat UL, kar pomeni skladnost z varnostnimi standardi.

Seznam delov

Pred začetkom montaže se prepričajte, da so vsi deli prisotni in nepoškodovani. Za identifikacijo glejte spodnji diagram.

Slika 1: ORE International 6336F Floating Shade Floor Lamp. This image displays the fully assembled lamp, featuring a rectangular white linen shade positioned above a slender brushed nickel stand, which is anchored by a solid black wooden base.

1. Base (Wooden)
2. Lower Pole Section (Brushed Nickel)
3. Upper Pole Section (Brushed Nickel)
4. Lamp Head with Socket (Brushed Nickel)
5. Rectangular Linen Shade
6. Shade Support Frame (if separate)
7. Power Cord with Step Switch
8. Hardware (Screws, Washers, Allen Wrench - specific to model)

Navodila za montažo

Follow these steps carefully to assemble your floor lamp. It is recommended to assemble the lamp on a soft, clean surface to prevent scratches.

1. Razpakirajte komponente: Carefully remove all parts from the packaging. Lay them out and verify against the Parts List.
2. Attach Lower Pole to Base: Connect the lower pole section (2) to the wooden base (1). Secure it using the provided hardware (screws/washers) and the appropriate tool (e.g., Allen wrench). Ensure the pole is firmly seated and stable.
3. Connect Upper Pole: Screw the upper pole section (3) onto the lower pole section (2). Gently twist until securely tightened. Be careful not to cross-thread.
4. Namestite L.amp Vodja: Pritrdite lamp head with socket (4) to the top of the upper pole section (3). Ensure the electrical wire passes freely through the pole sections and is not pinched.
5. Assemble Shade: If the shade (5) requires assembly, follow the specific instructions provided with the shade components. Typically, this involves attaching the shade fabric to a metal frame.
6. Attach Shade to Lamp Vodja: Carefully place the assembled shade (5) onto the lamp head (4). Secure it using the shade ring or finial, if applicable, by screwing it onto the lamp vtičnica.
7. Vstavite žarnico: Screw a suitable light bulb (not included, refer to specifications for type and wattage) v lamp vtičnico. Ne zategujte premočno.
8. Položaj Lamp: Sestavljeno lamp in its desired location, ensuring the power cord is not obstructed or under tension.

Navodila za uporabo

1. Povežite se z napajanjem: Priključite lampnapajalni kabel v standardno električno vtičnico.
2. Vklop/izklop: Locate the step switch on the power cord. Press the switch with your foot to turn the lamp ON. Press it again to turn the lamp IZKLOP.
3. Funkcija zatemnitve: Ta lamp is designed to be dimmable. If you wish to utilize this feature, ensure you use a dimmable bulb and connect the lamp to a compatible dimmer switch (not included). The integrated step switch provides simple on/off functionality.

Vzdrževanje

• Čiščenje: Odklopite lamp from the power source before cleaning. Use a soft, dry cloth to wipe the metal and wooden surfaces. For the linen shade, a lint roller or a soft brush can be used to remove dust. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
• Zamenjava žarnice: Zagotovite lamp is unplugged and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new bulb of the correct type and wattage (refer to Specifications).
• Redni pregledi: Periodically check the power cord for any signs of damage or fraying. Ensure all connections remain secure.

Odpravljanje težav

Specifikacije

Garancija in podpora

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. ORE International products typically come with a limited manufacturer's warranty.

Should you require technical assistance, replacement parts, or have questions not covered in this manual, please contact ORE International customer support. Contact details can usually be found on the manufacturer's official webspletnem mestu ali na računu.

Morda boste obiskali tudi ORE Store on Amazon za dodatne informacije o izdelku.