Luxor 2 Shelf Utility Cart Model HE38-B Instruction Manual

1. Varnostne informacije

Please observe the following safety guidelines to ensure safe operation and prevent damage to the product or injury to yourself.

• Zmogljivost teže: Do not exceed the maximum weight capacity of 400 lbs (evenly distributed). Overloading can cause structural failure and potential injury.
• Montaža: Ensure all components are securely assembled before use. Improper assembly can lead to instability.
• Kolesca: Always engage the locking brakes on the casters when the cart needs to remain stationary to prevent unintended movement.
• Površina: Use the cart on flat, stable surfaces. Avoid uneven terrain or inclines that could cause the cart to tip.
• Predlog 65 Opozorilo: Ta izdelek lahko vsebuje kemikalije, za katere zvezna država Kalifornija ve, da povzročajo raka in prirojene okvare ali druge reproduktivne poškodbe. Po rokovanju si umijte roke.

2. Vsebina paketa

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact Luxor customer support.

• Zgornja polica (1)
• Spodnja polica (1)
• Noge (4)
• 4-inch Swivel Casters (4) - Two with locking brakes

3. Navodila za montažo

Assembly of the Luxor 2 Shelf Utility Cart requires a rubber mallet (not included).

1. Attach Legs to Bottom Shelf: Carefully align the four legs with the designated slots on the underside of the bottom shelf. Ensure the leg with the integrated handle slot is positioned correctly if you intend to use the handle on the top shelf. Use a rubber mallet to gently tap each leg into place until fully seated. The fit is designed to be snug for stability.
2. Insert Casters: Insert the stem of each caster into the bottom of each leg. Push firmly until the casters click into place. Ensure the two casters with locking brakes are positioned on the same side for easier access.
3. Pritrdite zgornjo polico: Align the top shelf with the upper ends of the four legs. Ensure the ergonomic push handle is facing the desired direction. Use a rubber mallet to gently tap the top shelf onto the legs until it is fully seated and secure.
4. Končno preverjanje: Verify that all legs and shelves are securely connected and that the casters rotate freely.

Figure 1: Key components of the Luxor Utility Cart, including the ergonomic push handle, durable thermoplastic resin construction, and 4-inch swivel casters with locking brakes.

Figure 2: The fully assembled Luxor 2 Shelf Utility Cart, ready for use.

4. Navodila za uporabo

The Luxor 2 Shelf Utility Cart is designed for versatile use in various environments.

• Nalaganje košarice: Place items evenly distributed across the shelves. The 0.25-inch retaining lip helps secure items during transport. Do not concentrate heavy loads in one area.
• Premikanje vozička: Use the ergonomic push handle molded into the top shelf to maneuver the cart. Ensure the locking brakes are disengaged before moving.
• Pritrditev vozička: To keep the cart stationary, push down on the levers of the two locking casters until they are engaged. To release, lift the levers.

5. Vzdrževanje

Regular maintenance will prolong the life and functionality of your utility cart.

• Čiščenje: Wipe down the thermoplastic resin shelves and legs with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the surface. The material is designed not to stain, scratch, dent, or rust.
• Pregled kolesc: Periodically check the casters for debris (hair, lint, etc.) that may impede movement. Clean as necessary. Ensure casters are securely attached.
• Strukturni pregled: Occasionally inspect all connections to ensure they remain tight and secure.

6. Odpravljanje težav

If you encounter issues with your utility cart, refer to the following common solutions.

• Difficulty Assembling Legs/Shelves: The connections are designed for a tight fit. Ensure proper alignment and use a rubber mallet to gently tap components into place. Do not use excessive force or metal hammers, which could cause damage.
• Cart is Unstable: Verify that all legs are fully seated into both shelves. Ensure casters are properly inserted. Check that the cart is on a level surface.
• Kolesca se ne vrtijo gladko: Inspect casters for any obstructions like dirt or debris. Clean them thoroughly. Ensure the locking brakes are fully disengaged.
• Shelves Sagging Under Load: While the cart has a stated capacity of 400 lbs, ensure the weight is evenly distributed. Concentrated heavy loads in a small area may cause localized sagging. If sagging occurs with loads significantly below the stated capacity, contact customer support.

7. Specifikacije

Slika 3: Dimenzionalno nadview of the Luxor 2 Shelf Utility Cart.

8. Garancija in podpora

For warranty information or technical support, please contact Luxor customer service. Details can typically be found on the manufacturer's website or original purchase documentation.

When contacting support, please have your model number (HE38-B) and purchase date available.

Proizvajalec: Luksor