1. Uvod
Thank you for choosing the Teka Classic 2C 80 Stainless Steel Double Bowl Sink. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new sink. Please read these instructions carefully before beginning installation or use, and keep them for future reference.
The Teka Classic 2C 80 is an 80 cm built-in sink featuring two spacious bowls, constructed from high-quality 18/10 stainless steel for durability and resistance to wear and rust. It includes sound insulation for reduced noise and vibration during use, a basket valve, and a siphon for efficient drainage.
2. Varnostne informacije
- Pred začetkom kakršnih koli namestitvenih ali vzdrževalnih del se vedno prepričajte, da je dovod vode izklopljen.
- Wear appropriate personal protective equipment (e.g., gloves, safety glasses) during installation.
- Z umivalnikom ravnajte previdno, da se izognete praskam ali poškodbam.
- Prepričajte se, da so vsi priključki vodotesni, da preprečite puščanje.
- Do not use abrasive cleaners or harsh chemicals on the stainless steel surface, as this can cause damage.
- Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte s usposobljenim strokovnjakom.
3. Vsebina paketa
Preden nadaljujete z namestitvijo, preverite, ali so vse komponente prisotne in nepoškodovane:
- Teka Classic 2C 80 Double Bowl Sink Unit
- Basket Valve(s)
- Sifon
- Mounting clips/hardware (may vary by region)
4. Nastavitev in namestitev
The Teka Classic 2C 80 sink is designed for built-in (inset) installation. This method involves placing the sink into a pre-cut opening in the countertop and securing it with clips.
4.1 Priprava pulta
A precise cutout in your countertop is essential for proper installation. Refer to the technical drawing below for the exact dimensions required for the opening. It is recommended to use the provided template (if included) or carefully measure according to the diagram.

This technical diagram provides precise measurements for the Teka Classic 2C 80 sink, indicating an overall width of 800mm and a depth of 500mm. Individual bowl dimensions and spacing are also detailed, essential for countertop cutout during installation.
4.2 Sink Placement and Securing
- Apply a bead of silicone sealant around the edge of the countertop cutout to create a watertight seal.
- Carefully lower the sink into the prepared opening. Ensure it is properly aligned.
- From underneath the countertop, attach the mounting clips to the sink's underside and tighten them to secure the sink firmly in place. Do not overtighten.
4.3 Vodovodni priključki
Install the basket valves into the drain openings of both bowls. Connect the siphon and waste pipes according to standard plumbing practices. Ensure all connections are tight and leak-free. The sink features a pre-drilled faucet hole for easy installation of your chosen kitchen faucet.

An angled perspective of the Teka Classic 2C 80 stainless steel sink, showcasing its two bowls and a modern kitchen faucet installed on the deck between them. This view helps visualize the sink's appearance when installed.
5. Navodila za uporabo
The Teka Classic 2C 80 sink is designed for everyday kitchen tasks. Its two bowls offer versatility, allowing you to wash dishes in one bowl while rinsing in the other, or to soak items in one while keeping the other free for food preparation.

Ta slika prikazuje pogled od zgoraj navzdol view of the Teka Classic 2C 80 built-in stainless steel sink, featuring two identical rectangular bowls with central drain openings.
- Pretok vode: Use your kitchen faucet to control the water flow and temperature into the sink bowls.
- Drenaža: The basket valves allow you to open or close the drain. Ensure they are open for water to drain freely.
- Zvočna izolacija: The integrated sound insulation helps to reduce noise from water flow and dishwashing, providing a quieter kitchen environment.
6. Vzdrževanje in čiščenje
Proper care will ensure the longevity and appearance of your stainless steel sink.
- Dnevno čiščenje: Clean the sink regularly with a soft cloth and warm soapy water. Rinse thoroughly and dry with a clean cloth to prevent water spots and streaks.
- Trdovratni madeži: For more stubborn stains, use a non-abrasive stainless steel cleaner. Always rub in the direction of the grain.
- Izogibajte se: Do not use steel wool, abrasive sponges, harsh chemicals (e.g., bleach, strong acids), or cleaners containing chlorides, as these can damage the stainless steel finish.
- Preprečevanje prask: While stainless steel is durable, it can scratch. Use a sink grid or mat to protect the bottom of the bowls from heavy pots and pans.
- Vzdrževanje odtokov: Periodically remove the basket valve to clean any food debris or buildup to ensure proper drainage.
7. Odpravljanje težav
Tukaj je nekaj pogostih težav in njihovih možnih rešitev:
| Težava | Možen vzrok | rešitev |
|---|---|---|
| Počasna drenaža | Food debris or grease buildup in the drain or siphon. | Remove basket valve and clean thoroughly. Use a drain cleaner suitable for plumbing, or disassemble and clean the siphon. |
| Water Leaks Around Sink Edge | Inadequate sealant or loose mounting clips. | Preverite in privijte pritrdilne sponke. Po potrebi ponovno nanesite silikonsko tesnilno maso. |
| Water Leaks from Plumbing Connections | Ohlapne povezave ali poškodovana tesnila. | Check and tighten all pipe connections. Replace washers or seals if they appear damaged. |
| Water Spots/Streaks on Surface | Ostanki trde vode ali nepravilno sušenje. | Dry the sink thoroughly after each use. For existing spots, use a stainless steel cleaner or a solution of vinegar and water, then rinse and dry. |
8. Specifikacije
| Funkcija | Specifikacija |
|---|---|
| Znamka | Teka |
| Številka modela | 11119006 |
| Material | 18/10 Nerjaveče jeklo |
| Slog | 2 Bowls (2 Senos) |
| Skupna velikost | 80 cm |
| Mere izdelka (D x Š x V) | 10f. x 10an. x 10al. millimeters (Note: This dimension seems generic, refer to technical drawing for actual cutout dimensions) |
| Globina posode | 190 mm |
| Vrsta namestitve | Built-in (Inset) |
| Vrsta odtoka | Pop-up (Basket Valve) |
| Število lukenj za pipo | 1 |
| Teža | 4.8 kilogramov |
| Zvočna izolacija | ja |
9. Garancija in podpora
This Teka sink comes with a triletna garancija proizvajalcaProsimo, shranite dokazilo o nakupu za uveljavljanje garancije.
For technical assistance, spare parts, or warranty inquiries, please contact Teka customer support through their official website or the retailer where the product was purchased. Always provide the model number (11119006) and a detailed description of the issue when seeking support.