RICOO R02

RICOO R02 Tilting TV Wall Mount Instruction Manual

Model: R02 | For 22-37 Inch TVs

1. Uvod

This manual provides detailed instructions for the safe and correct installation, operation, and maintenance of your RICOO R02 Tilting TV Wall Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury. Keep this manual for future reference.

2. Varnostne informacije

  • Zmogljivost teže: Ne prekoračite največje nosilnosti 30 kg (66 lbs).
  • Velikost zaslona: Ta nosilec je zasnovan za televizorje z diagonalo med 22 in 37 palci.
  • Vrsta stene: The included dowels are suitable for concrete walls only. For other wall types (e.g., wood stud, brick, drywall), consult a professional or purchase appropriate mounting hardware.
  • Profesionalna namestitev: If you are unsure about the installation process, seek assistance from a qualified professional.
  • Orodja: Ensure you have all necessary tools before starting installation.
  • otroci: Med namestitvijo naj se otroci ne zadržujejo v območju namestitve.
  • Poškodbe: Do not install if any parts are damaged. Contact customer support for replacement parts.

3. Vsebina paketa

Preden nadaljujete z namestitvijo, preverite, ali so vse komponente prisotne in nepoškodovane.

  • Pre-assembled TV bracket
  • Dowels (for concrete walls only)
  • Screws for screen attachment (various sizes)
  • Wall screws and other mounting accessories
Technical drawing of RICOO R02 TV wall mount with dimensions and angles

Slika 3.1: Technical drawing showing the dimensions and movement capabilities of the R02 wall mount. All measurements are in millimeters.

4. Specifikacije

ZnamkaRICOO
Številka modelaR02
Združljive velikosti zaslona22 - 37 palcev (56 - 94 cm)
Največja nosilnost30 kg (66 lbs)
Združljivost VESA75x75 mm, 100x100 mm, 200x100 mm, 200x200 mm
Kot nagiba+/- 15 stopinj
Zasučni kotUp to 180 degrees (depending on screen width)
Razdalja do stene68 mm - 450 mm
MaterialLegirano jeklo
barvaČrna
Dimenzije izdelka29 x 23 x 8 cm
Teža izdelka2.88 kg
RICOO R02 TV wall mount supporting a TV, with 'MAX 30KG' overlaid

Slika 4.1: The RICOO R02 wall mount is designed to safely support televisions weighing up to 30 kg.

RICOO R02 TV wall mount showing VESA compatibility and screen size range

Slika 4.2: This image illustrates the VESA compatibility (75x75, 100x100, 200x100, 200x200 mm) and the recommended screen size range for the mount. Please note that while the image shows 32"-55", the product is specified for 22"-37" TVs.

5. Nastavitev in namestitev

Follow these steps carefully for a secure installation. It is recommended to have two people for installation.

  1. Pripravite steno:
    • Identify the desired mounting location on your wall. Ensure the wall can support the weight of the mount and your TV.
    • Use a stud finder to locate wall studs if mounting on a wood stud wall. For concrete walls, ensure there are no hidden pipes or electrical wires.
    • Mark the drilling points for the wall plate using the mount as a template.
  2. Vrtanje lukenj:
    • Drill pilot holes at the marked locations. The drill bit size will depend on your wall type and the provided screws/dowels.
    • Insert the appropriate wall anchors (dowels for concrete walls) into the drilled holes.
  3. Pritrdite stensko ploščo:
    • Secure the wall plate of the mount to the wall using the provided wall screws. Ensure it is level and tightly fastened.
  4. Pritrditev nosilcev za televizor na televizor:
    • Televizor previdno položite z zaslonom navzdol na mehko, čisto površino.
    • Prepoznajte pritrdilne luknje VESA na zadnji strani televizorja.
    • Select the correct size screws from the provided hardware that fit your TV's VESA holes.
    • Attach the TV brackets to the back of your TV using these screws. Do not overtighten.
  5. Namestitev televizorja na stensko ploščo:
    • S pomočjo previdno dvignite televizor s pritrjenimi nosilci.
    • Nosilce televizorja pritrdite na stensko ploščo. Prepričajte se, da je televizor varno nameščen na nosilcu.
    • Engage any safety locking mechanisms on the mount to prevent accidental dislodgement.
RICOO R02 TV wall mount installed with a TV, viewed s strani

Slika 5.1: The RICOO R02 wall mount securely installed, holding a television at an extended position from the wall.

6. Navodila za uporabo

The RICOO R02 mount offers flexible viewing možnosti:

  • Nagibanje: Gently push or pull the top or bottom of the TV to adjust the tilt angle up to +/- 15 degrees. This helps reduce glare and optimize viewing.
  • Vrtljivi: The mount allows for swiveling the TV up to 180 degrees horizontally. Carefully push the TV left or right to achieve the desired viewing angle. The maximum swivel range depends on the width of your TV and its distance from the wall.
  • Extending/Retracting: The mount can extend the TV from the wall between 68 mm and 450 mm. Gently pull the TV forward or push it back towards the wall.
RICOO R02 TV wall mount demonstrating tilt and swivel capabilities

Slika 6.1: Illustration of the mount's tilt range (+/- 15 degrees) and swivel range (up to 180 degrees), allowing for optimal viewz različnih položajev.

7. Vzdrževanje

Redno vzdrževanje zagotavlja dolgo življenjsko dobo in varno delovanje vašega stenskega nosilca za televizor.

  • Čiščenje: Nosilec obrišite z mehko, suho krpo. Izogibajte se abrazivnim čistilom ali topilom.
  • Preverjanje tesnosti: Občasno preverite vse vijake in matico, da se prepričate, da so trdno priviti. Po potrebi jih privijte, vendar ne premočno.
  • Preverjanje gibanja: Occasionally move the TV through its full range of motion (tilt, swivel, extend) to ensure smooth operation.
  • Pregled škode: Inspect the mount for any signs of wear, damage, or corrosion. If any issues are found, discontinue use and contact customer support.

8. Odpravljanje težav

TežavaMožen vzrokrešitev
Televizor ni poravnan.Stenska plošča ni nameščena ravno.Remove TV, adjust wall plate, and re-mount. Use a spirit level during installation.
Nosilec se zdi ohlapen ali nestabilen.Screws are loose; incorrect wall anchors; wall material not strong enough.Check and tighten all screws. Ensure correct wall anchors were used for your wall type. If the wall is insufficient, consult a professional.
Difficulty tilting or swiveling the TV.Joints are too tight; TV is too close to the wall or other obstructions.Check for adjustment screws on the mount's joints and loosen slightly if needed. Ensure sufficient clearance around the TV.
Nosilec za TV ni primeren.Napačen vzorec VESA ali velikost/teža televizorja.Verify your TV's VESA pattern and weight against the mount's specifications (Section 4). Ensure your TV is within the 22-37 inch range and under 30 kg.

9. Garancija in podpora

For warranty information or technical support, please contact RICOO customer service. Keep your purchase receipt as proof of purchase.

Proizvajalec: ENZ Engineering GmbH

GTIN: 04260201860186

For further assistance, please visit the official RICOO webspletno mesto ali se obrnite na njihove kanale za podporo.

© 2024 RICOO. Vse pravice pridržane.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.