Eaton OS310U-W-K Motion Sensor Switch User Manual

1. Uvod

The Eaton OS310U-W-K is a motion-activated occupancy sensor wall switch designed to automatically control lighting based on room occupancy. This device enhances energy efficiency by turning lights on when a person enters a room and off after a selectable time delay once the room is vacated. It is compatible with a wide range of lighting loads, including incandescent, magnetic low voltage (MLV), electronic low voltage (ELV), fluorescent, compact fluorescent (CFL), and LED lights, as well as motors up to 1/6 HP.

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Eaton OS310U-W-K motion sensor switch.

2. Varnostne informacije

OPOZORILO: To avoid fire, shock, or death; turn off power at the circuit breaker or fuse box and test that the power is off before wiring. All wiring must be performed in accordance with national and local electrical codes.

• Pred namestitvijo ali servisiranjem vedno izklopite napajanje na odklopniku.
• A neutral wire is required for the installation of this device. Verify your switch box wiring includes a neutral wire before proceeding.
• Ta naprava je namenjena samo za uporabo v zaprtih prostorih.
• Do not use with dimmable fluorescent fixtures unless specifically rated for occupancy sensor control.
• Če ste glede katerega koli dela namestitvenega postopka negotovi, se posvetujte z usposobljenim električarjem.

3. Značilnosti izdelka

• Samodejno delovanje: Lights turn on automatically upon motion detection and off after a set delay.
• Vsestranska združljivost: Works with incandescent, MLV, ELV, fluorescent, CFL, and LED lighting loads, as well as 1/6 HP motors.
• Široka pokritost: Zagotavlja 180-stopinjsko polje view and up to 1000 square feet of major motion coverage.
• Fleksibilno ožičenje: Podpira tako enopolne kot tripolne konfiguracije ožičenja.
• Nastavljiv časovni zamik: Selectable time delays of 5 seconds (test mode), 5 minutes (factory default), 15 minutes, and 30 minutes.
• Preglasitev ambientalne svetlobe: Preprečuje vklop luči, če je prisotna zadostna naravna svetloba.
• Integrated Nightlight: Selectable on/off LED nightlight with press-and-hold dimming function.
• Walk-in-Delay Feature: Shortens the time delay when motion is detected briefly, saving energy.
• Načini delovanja: Toggle between auto-on/auto-off or manual-on/auto-off modes.
• Funkcija obvoda: Allows the sensor to operate as a traditional manual on/off switch.
• LED indikator: Green LED indicates load status, acts as a locator light in the dark, and blinks upon motion detection.
• Decorator Style: Includes a mid-size decorator wall plate.

4. Nastavitev in namestitev

The Eaton OS310U-W-K is designed to fit into a standard wall box and replaces a traditional light or fan switch. Installation requires a neutral wire. If your existing switch box does not have a neutral wire, consult an electrician.

4.1 Zahteve za ožičenje

• Zahtevane žice: Ground, Hot (Line), Load, and Neutral.
• 3-Way Configuration: For 3-way operation, an additional traveler wire is needed. Note that 3-way wiring for this sensor switch differs from standard 3-way switches; the wiring is effectively in parallel. Refer to the detailed wiring diagram provided with your product packaging for specific instructions.
• The device comes with 6-inch pre-stripped #14 AWG wire leads for connection.

4.2 koraki namestitve

1. Izklopite napajanje: At the circuit breaker or fuse box, turn off the power to the switch location. Verify power is off using a voltage tester.
2. Odstranite staro stikalo: Carefully remove the existing wall plate and switch from the wall box. Disconnect the wires from the old switch, noting their connections.
3. Prepoznajte žice: Identify the Line (Hot), Load, Neutral, and Ground wires in the wall box. The neutral wire is typically white.
4. Povežite novo stikalo: Connect the wires from the Eaton OS310U-W-K switch to the corresponding wires in the wall box using wire nuts. Ensure all connections are secure.
   • Connect the green wire from the sensor to the bare copper or green ground wire in the wall box.
   • Connect the black wire from the sensor to the Line (Hot) wire.
   • Connect the red wire from the sensor to the Load wire (to the light fixture).
   • Connect the white wire from the sensor to the Neutral wire.
   • For 3-way installations, refer to the specific wiring diagram provided with the product.
5. Namestitev stikala: Carefully fold the wires into the wall box and secure the switch to the wall box with the provided screws.
6. Namestite stensko ploščo: Attach the decorator mid-size wall plate.
7. Obnovi moč: Ponovno vklopite napajanje na odklopniku.

Image of the Eaton OS310U-W-K motion sensor switch in white, showing its decorator style and push-button interface.

5. Navodila za uporabo

5.1 Automatic Operation (Occupancy Mode)

In this mode, the lights will automatically turn on when motion is detected and turn off after the set time delay once the room is vacant. This is the default operating mode.

5.2 Manual-On / Auto-Off Mode (Vacancy Mode)

To switch to manual-on/auto-off mode, press and hold the main switch button for a few seconds until the indicator light changes. In this mode, you must manually turn on the lights by pressing the switch button. The lights will then automatically turn off after the set time delay when no motion is detected.

5.3 Bypass Feature (Traditional Switch Mode)

The bypass feature allows the sensor to function as a traditional manual on/manual off switch, ignoring motion detection. Consult the product's detailed instructions for how to activate and deactivate this mode, typically involving a specific press-and-hold sequence.

5.4 Funkcija nočne svetlobe

The integrated LED nightlight can be turned on or off and its brightness adjusted. Press and hold the nightlight button (if separate) or a specific section of the main button to dim the nightlight. The nightlight provides a locator light in the dark.

5.5 LED indikator

A green LED on the switch indicates the load status (lights on/off). It also serves as a locator light in dark conditions and blinks to signal motion detection.

6. Nastavitve konfiguracije

The Eaton OS310U-W-K offers several adjustable settings to customize its operation. These settings are typically accessed by removing the wall plate and adjusting small dials or switches on the device itself.

6.1 Nastavitev časovne zakasnitve

The time delay determines how long the lights remain on after the last detected motion. Available settings include:

• 5 seconds (Test Mode)
• 5 minutes (Factory Default)
• 15 minut
• 30 minut

6.2 Ambient Light Override

This setting allows you to prevent the lights from turning on automatically if there is sufficient natural light in the room. This feature helps conserve energy by ensuring lights are only activated when truly needed.

6.3 Walk-in-Delay

The walk-in-delay feature intelligently shortens the time delay if motion is detected only briefly, further optimizing energy savings.

7. Vzdrževanje

The Eaton OS310U-W-K motion sensor switch requires minimal maintenance.

• Čiščenje: To clean the device, gently wipe the surface with a soft, damp krpo. Ne uporabljajte abrazivnih čistil, topil ali agresivnih kemikalij, saj lahko poškodujejo površino ali notranje komponente.
• Pregled: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and address them or consult a qualified electrician.

8. Odpravljanje težav

If you encounter issues with your Eaton OS310U-W-K motion sensor switch, refer to the following common problems and solutions:

9. Specifikacije

10. Garancija in podpora

10.1 Garancija proizvajalca

Eaton products are backed by a manufacturer's warranty. Please refer to the warranty information included with your product packaging or visit the official Eaton webZa podrobnosti o garancijskih pogojih in trajanju obiščite spletno mesto.

10.2 Tehnična podpora

For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Eaton customer support. Contact information can typically be found on the product packaging, the Eaton website, or by searching for 'Eaton Electrical Support'.

When contacting support, please have your product model number (OS310U-W-K) and purchase date available.