Westbrass D49721-26

Westbrass D49721-26 Pull & Drain Bath Waste and Overflow Instruction Manual

Model: D49721-26 | Finish: Polished Chrome

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Westbrass D49721-26 Pull & Drain Sch. 40 PVC Bath Waste with One-Hole Top Elbow. Please read all instructions carefully before beginning installation to ensure proper function and safety. Keep this manual for future reference.

Varnostne informacije

  • Always turn off the main water supply before installing or servicing any plumbing fixtures.
  • Med namestitvijo nosite ustrezno osebno zaščitno opremo, kot so zaščitna očala in rokavice.
  • Prepričajte se, da so vse povezave varne in vodotesne, da preprečite puščanje.
  • Če ste glede katerega koli dela postopka namestitve negotovi, se posvetujte z usposobljenim vodovodarjem.
  • Do not overtighten plastic components, as this may cause damage.

Vsebina paketa

Pred začetkom namestitve preverite, ali so prisotne vse komponente:

  • PVC Sch. 40 Piping (Vertical and Horizontal sections)
  • One-Hole Top Elbow
  • Overflow Faceplate (Polished Chrome)
  • Prelivno tesnilo
  • Pull & Drain Stopper Assembly (Polished Chrome)
  • Odtočno tesnilo
  • Mounting Screw for Overflow Faceplate
Eksplodiral view of Westbrass D49721-26 bath waste and overflow components.
This image displays all individual components included in the Westbrass D49721-26 Pull & Drain Bath Waste and Overflow kit. It includes the PVC piping, overflow elbow, overflow faceplate, rubber gaskets, and the pull & drain stopper assembly.

Nastavitev in namestitev

Follow these steps for proper installation of the bath waste and overflow assembly:

  1. Priprava kopalne kadi: Ensure the bathtub drain and overflow openings are clean and free of debris.
  2. Assemble the Overflow: Attach the one-hole top elbow to the vertical PVC pipe. Ensure a secure fit.
  3. Install Overflow Gasket and Faceplate: From inside the tub, place the overflow gasket over the overflow opening. Position the polished chrome overflow faceplate over the gasket and secure it to the top elbow using the provided mounting screw. Do not overtighten.
  4. Priključitev odtočne montaže: From underneath the tub, connect the horizontal PVC pipe to the bottom of the vertical PVC pipe. Then, attach the drain shoe to the horizontal pipe.
  5. Install Pull & Drain Stopper: Apply plumber's putty or a silicone sealant around the underside of the flange of the pull & drain stopper assembly. Insert the stopper assembly into the bathtub drain opening from inside the tub.
  6. Secure Drain Stopper: From underneath the tub, place the drain gasket onto the threaded portion of the drain shoe and thread it onto the pull & drain stopper assembly. Hand-tighten, then use a wrench for a final snug turn, being careful not to overtighten.
  7. Test za puščanje: Fill the bathtub with water and check all connections for any signs of leakage. Tighten connections as necessary.
Diagram showing the assembly of Westbrass D49721-26 bath waste and overflow with a bathtub.
This diagram illustrates how the Westbrass D49721-26 bath waste and overflow components fit together and connect to a bathtub. It highlights the placement of the overflow elbow, faceplate, drain stopper, and associated gaskets.
Comparison of single-hole and double-hole top elbow types for overflow faceplate installation.
This image compares two types of top elbows for overflow faceplate installation: a single-hole option for easy one-screw installation and a double-hole option requiring a bracket and two screws. Your kit will include the single-hole option for this model.
Westbrass D49721-26 Pull & Drain Bath Waste with One-Hole Top Elbow in Polished Chrome, installed in a bathtub.
This image shows the Westbrass D49721-26 Pull & Drain Bath Waste and Overflow assembly, featuring a polished chrome finish, installed in a bathtub. The pull & drain stopper is visible at the bottom of the tub, and the one-hole overflow faceplate is visible on the side.

Navodila za uporabo

The Westbrass D49721-26 features a convenient pull & drain stopper for easy operation:

  • Za zapiranje odtoka: Pull the knob on the stopper upwards until it clicks into the closed position. This will seal the drain, allowing the tub to fill with water.
  • Za odpiranje odtoka: Push the knob on the stopper downwards until it clicks into the open position. This will allow water to drain from the tub.

Vzdrževanje

To maintain the appearance and functionality of your Westbrass bath waste and overflow:

  • Čiščenje: Clean the polished chrome surfaces regularly with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or polishes that could damage the finish.
  • Drain Care: Periodically remove the pull & drain stopper and clean any hair or debris that may have accumulated to ensure proper drainage.
  • Pregled tesnila: Inspect rubber gaskets periodically for wear or damage. Replace if necessary to prevent leaks.

Odpravljanje težav

TežavaMožen vzrokrešitev
Water leaks from drain or overflow.Ohlapne povezave, poškodovana tesnila, nepravilna uporaba tesnilne mase.Check and tighten all connections. Inspect gaskets for damage and replace if needed. Reapply plumber's putty or sealant if necessary.
Drain stopper does not seal properly.Debris under stopper, stopper mechanism malfunction.Remove stopper and clean any debris. Ensure stopper is fully engaged when closed. If mechanism is faulty, replacement may be needed.
Počasna drenaža.Hair or debris accumulation in the drain.Remove the pull & drain stopper and clear any obstructions from the drain opening and pipe.

Specifikacije

  • Številka modela: D49721-26
  • Material: Polivinil klorid (PVC)
  • Končaj: Polirani krom
  • Dimenzije izdelka: 6"W x 14"H (Approximate, refer to technical drawing for details)
  • Teža artikla: 2.6 funtov
  • UPC: 747028032674
  • Vključene komponente: (1) - Bathtub Waste & Overflow Assembly
Technical drawing with dimensions for Westbrass D49721-26 Sch. 40 PVC Bath Waste and Overflow.
This technical drawing provides detailed dimensions and component breakdown for the Westbrass D49721-26 Sch. 40 PVC Bath Waste and Overflow. It includes measurements for the PVC piping, overflow elbow, and drain assembly, along with part numbers.

Garancija

Ta izdelek Westbrass je zajet v 1-letna omejena garancija. For specific terms and conditions, please refer to the warranty document provided with your purchase or visit the official Westbrass webmesto.

Podpora

For technical assistance, replacement parts, or warranty claims, please contact Westbrass customer service. Refer to the packaging or the official Westbrass webspletno mesto za trenutne kontaktne podatke.

© 2024 Westbrass. Vse pravice pridržane.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.