Uporabniški priročnik za prenosni DLP projektor InFocus IN102

1. Uvod

This manual provides essential information for the setup, operation, and maintenance of your InFocus IN102 Portable DLP Projector. The IN102 is designed for various presentation environments, including conference rooms and classrooms, offering a balance of performance and portability.

Glavne lastnosti vključujejo:

• SVGA (800 x 600) native resolution, supporting up to UXGA (1600 x 1200).
• 2700 ANSI Lumens brightness (2200 lumens in Eco Mode) for clear images in various lighting conditions.
• 1500:1 contrast ratio for distinct visuals.
• DLP® technology with InFocus BrilliantColor™ for accurate color reproduction.
• 3D-ready capability for displaying 3D content.
• Lightweight design (approximately 5 pounds / 2.3 kg) for portability.
• Dolgotrajno lamp and filter-free design for reduced maintenance.

2. Kaj je v škatli

Upon unpacking, please verify that all the following items are included with your InFocus IN102 projector:

• InFocus IN102 Projector
• Napajalni kabel
• VGA kabel
• Torbica za prenašanje
• Daljinski upravljalnik
• Varnostna navodila
• CD Quick Start/User Guide

3. Izdelek je končanview

Slika 3.1: Spredaj View of the IN102 Projector. This image displays the projector's front, highlighting the projection lens and the primary ventilation grille.

Slika 3.2: Zadaj View of the IN102 Projector. This image illustrates the back panel, featuring the power input, two VGA ports, S-Video, and Composite video inputs.

Slika 3.3: Zgornji del View of the IN102 Projector. This image shows the top surface, including the integrated control panel buttons and the manual focus/zoom adjustment rings.

Slika 3.4: Spodaj View of the IN102 Projector. This image displays the underside, revealing the mounting points for ceiling installation and the adjustable feet for leveling.

4. Nastavitev

4.1 Namestitev

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector, keeping clear of any obstructions to the air intake and exhaust vents. The distance from the screen will determine the image size. Adjust the projector's angle to minimize keystone distortion.

4.2 Priključitev napajanja

1. Connect the power cord to the AC inlet on the rear of the projector.
2. Drugi konec napajalnega kabla priključite v ozemljeno električno vtičnico.

4.3 Priključitev video virov

The IN102 offers multiple input options:

• VGA (Computer): Use the supplied VGA cable to connect your computer's VGA output to one of the VGA input ports (VGA1 or VGA2) on the projector.
• S-Video: Connect devices with S-Video output (e.g., DVD players) to the S-Video port.
• Kompozitni video: Connect devices with Composite video output (e.g., VCRs, older game consoles) to the Composite video port.

Preden vklopite projektor, se prepričajte, da so vsi kabli varno priključeni.

5. Navodila za uporabo

5.1 Vklop/izklop

1. Za vklop pritisnite Moč gumb na nadzorni plošči projektorja ali daljinskem upravljalniku. Indikatorska lučka napajanja bo zasvetila.
2. Za izklop pritisnite Moč button twice. The projector will enter a cooling cycle before shutting down completely. Do not unplug the projector during the cooling cycle.

5.2 Izbira vhodnega vira

Pritisnite Vir button on the projector or remote control to cycle through available input sources (VGA1, VGA2, S-Video, Composite) until your desired source is displayed.

5.3 Prilagoditev slike

• Fokus in povečava: Rotate the focus and zoom rings on the projector lens until the image is sharp and fills the screen as desired.
• Popravek Keystone: If the projected image appears trapezoidal, use the keystone correction function (usually via buttons on the control panel or remote) to adjust the image geometry to a rectangular shape.
• Svetlost in kontrast: Access the on-screen display (OSD) menu to fine-tune brightness, contrast, and other image settings.

5.4 Ekološki način

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for presentations in dimly lit environments. Refer to the OSD menu for Eco Mode activation.

5.5 3D funkcionalnost

The IN102 is 3D-ready. To project 3D content, ensure your source device is compatible and configured for 3D output, and use appropriate 3D glasses (sold separately). Consult your 3D source device's manual for specific setup instructions.

6. Vzdrževanje

6.1 Lamp Zamenjava

Projektor lamp ima omejeno življenjsko dobo. Ko lamp life indicator illuminates or the image brightness significantly decreases, the lamp needs replacement. The lamp door is conveniently located on the top of the projector for easy access, even when the unit is installed.

1. Power off the projector and allow it to cool completely for at least 30 minutes.
2. Izključite napajalni kabel.
3. Poiščite in odprite lamp pokrov na vrhu projektorja.
4. Previdno odstranite staro lamp module and replace it with a new InFocus-approved lamp (SP-LAMP-060).
5. Zavarujte lamp pokrijte in priključite napajalni kabel.
6. Ponastavite lamp časovnik v zaslonskem meniju projektorja.

6.2 Čiščenje

The IN102 features a filter-free design, eliminating the need for filter cleaning or replacement. Periodically clean the projector's exterior with a soft, dry cloth. For the lens, use a lens cleaning cloth and solution specifically designed for optical surfaces.

6.3 Shranjevanje

When not in use for extended periods, store the projector in its carrying case in a cool, dry environment, away from direct sunlight and extreme temperatures.

7. Odpravljanje težav

This section addresses common issues you might encounter with your InFocus IN102 projector.

7.1 No Image or Blank Screen

• Preverite povezave: Ensure all video cables (VGA, S-Video, Composite) are securely connected to both the projector and the source device.
• Select Correct Input: Uporabite Vir button on the projector or remote to select the correct input channel corresponding to your connected device.
• Nastavitve zaslona računalnika: If connecting a laptop, ensure its display output is enabled. On many Windows laptops, pressing the Fn key simultaneously with a function key (often F4, F5, F7, oz F8, indicated by a monitor icon) toggles between display modes (laptop only, projector only, or both).
• Projektor Lamp: Preverite lamp indicator light. If it's red or blinking, the lamp morda potrebna zamenjava.

7.2 Projector Shuts Off Unexpectedly

• Pregrevanje: Ensure the projector's ventilation vents are not blocked. Excessive heat can cause the projector to shut down automatically to prevent damage. Allow the unit to cool down in a well-ventilated area.
• Lamp Težave: An aging or faulty lamp can cause intermittent shutdowns. Consider replacing the lamp if it's nearing the end of its lifespan.
• Napajalnik: Check the power cord connection and ensure the power outlet is functioning correctly.

7.3 Težave s kakovostjo slike

• Zamegljena slika: Adjust the focus ring on the projector lens.
• Popačena slika (trapez): Use the keystone correction function to square the image.
• Poor Color/Brightness: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the room lighting is appropriate for the selected display mode (e.g., Eco Mode for darker rooms).
• Resolution Mismatch: Ensure your source device's output resolution is compatible with the projector's native or supported resolutions.

7.4 Daljinski upravljalnik ne deluje

• Baterije: Zamenjajte baterije v daljinskem upravljalniku.
• Linija vida: Ensure there is a clear line of sight between the remote control and the projector's IR receiver.

8. Specifikacije

9. Garancija in podpora

9.1 Omejena garancija

All new DLP® projectors from InFocus, including the IN102, are backed by a comprehensive limited warranty:

• Projektor: 5-letna omejena garancija
• Deli in delo: 2-year coverage
• Lamp: 6-mesečna omejena garancija

Za garancijske zahtevke shranite dokazilo o nakupu.

9.2 Podpora strankam

For further assistance, technical support, or warranty inquiries, please refer to the contact information provided in your product's quick start guide or visit the official InFocus support webmesto.