POOL BLASTER Max CG

POOL BLASTER Max CG Cordless Pool Vacuum Instruction Manual

Model: Max CG (31000KL)

Uvod

Thank you for choosing the POOL BLASTER Max CG Cordless Pool Vacuum. This commercial-grade, heavy-duty, handheld, and rechargeable cleaner is designed for efficient maintenance of both inground and above-ground pools and spas. Its hoseless design and powerful suction simplify debris removal, ensuring a clean swimming environment.

Varnostne informacije

  • Pred uporabo naprave preberite vsa navodila.
  • Do not operate the vacuum out of water for extended periods to prevent motor damage.
  • Preden priključite polnilnik, se prepričajte, da je polnilna vrata suha.
  • Keep children away from the appliance during operation and charging.
  • Uporabljajte samo priloženi polnilnik.

Vsebina paketa

Preverite, ali so vsi elementi prisotni:

  • POOL BLASTER Max CG Unit (Motor Box, Debris Chamber)
  • 12.75" Vacuum Head
  • Kapica za nos
  • X-Treme Multilayered Filter Bag (for small debris)
  • All-Purpose Filter Bag (for large debris)
  • Stenski polnilec
Diagram of Pool Blaster Max CG parts including vacuum head, nose cap, X-Treme Multilayered filter bag, debris chamber, and motor box.
Slika 1: Eksplodirano view of POOL BLASTER Max CG components.

This image displays the main components of the Pool Blaster Max CG: the vacuum head, nose cap, X-Treme Multilayered filter bag, debris chamber, and motor box with the On/Off button.

Nastavitev

  1. Attach Filter Bag: Insert the desired filter bag (X-Treme for fine debris or All-Purpose for large debris) into the debris chamber.
  2. Assemble Vacuum Head: Attach the 12.75" vacuum head or the nose cap to the front of the debris chamber. Ensure it clicks securely into place.
  3. Connect to Pole: Slide a standard telescopic pool pole (not included) into the pole adapter on the main unit until it locks.
Pool Blaster Max CG disassembled showing the main unit, vacuum head, and filter bag.
Figure 2: The Pool Blaster Max CG disassembled, illustrating its main components before assembly.

This image shows the main body of the vacuum, the detachable vacuum head, and the filter bag, ready for assembly.

Polnjenje

  1. Locate the charging port on the side of the main unit.
  2. Preden priključite polnilnik, se prepričajte, da je polnilna vrata suha.
  3. Plug the wall charger into the charging port.
  4. Polnilnik priključite v standardno električno vtičnico. Indikatorska lučka na polnilniku bo prikazovala stanje polnjenja.
  5. A full charge takes approximately 4 hours and provides up to 60 minutes of run time.
Pool Blaster Max CG charging by an electrical outlet.
Figure 3: The Pool Blaster Max CG connected to its charger and plugged into a wall outlet.

This image demonstrates the correct way to connect the Pool Blaster Max CG to its charger for recharging.

Navodila za uporabo

  1. Submerge the Unit: Fully submerge the vacuum unit in the water before turning it on.
  2. Aktiviraj: Press the On/Off button to start the vacuum.
  3. Clean Pool/Spa: Guide the vacuum along the bottom and sides of your pool or spa to collect debris. The rollers and brushes on the vacuum head assist in effective cleaning.
  4. Čiščenje na mestu: For hard-to-reach areas or concentrated debris, use the nose cap attachment for precise spot cleaning.
  5. Izklopi: Once cleaning is complete, turn off the vacuum while it is still submerged in water.
  6. Odstranite iz vode: Carefully lift the unit out of the water.
Pool Blaster Max CG picking up dirt underwater.
Figure 4: The Pool Blaster Max CG actively vacuuming debris from the bottom of a pool.

This image shows the vacuum head effectively collecting debris from the pool floor.

Video 1: A demonstration of the Pool Blaster Max CG in use, showing its powerful suction and ease of maneuverability underwater.

This video provides a visual guide on how to operate the Pool Blaster Max CG for effective cleaning of your pool or spa.

Vzdrževanje

  1. Empty Debris Chamber: Open the debris chamber and remove the filter bag.
  2. Clean Filter Bag: Rinse the filter bag thoroughly with a hose to remove all collected debris. Ensure it is clean before reinserting.
  3. Enota za pregled: Periodically check the vacuum head, rollers, and brushes for wear or damage. Replace parts as needed.
  4. Shranjevanje: Napravo shranjujte na hladnem in suhem mestu, stran od neposredne sončne svetlobe.
Pool Blaster Max CG high-capacity filter bag with dirt inside.
Figure 5: A close-up of the high-capacity filter bag, showing collected debris.

This image highlights the filter bag's capacity for holding debris, emphasizing the need for regular cleaning.

Odpravljanje težav

TežavaMožen vzrokrešitev
Vakuum se ne vklopiLow battery; Unit not fully submergedCharge battery; Submerge unit completely before activating
Zmanjšano sesanjeClogged filter bag; Debris in intake; Worn brushesClean/replace filter bag; Clear intake; Replace brushes
Kratek čas delovanjaBattery not fully charged; Aging batteryEnsure full charge (4 hours); Consider battery replacement if performance degrades significantly

Specifikacije

  • Model: Max CG (31000KL)
  • vir energije: Baterija (litij-ionska)
  • voltage: 11.8 volta
  • Vsebnost energije litijeve baterije: 2200 mAh
  • Čas delovanja: Do 1 ure
  • Čas polnjenja: Približno 4 ur
  • Dimenzije izdelka: 12.75 cm D x 7 cm Š x 23.5 cm V
  • Teža artikla: 5.65 funta
  • Material: Plastika
  • Nadzorna metoda: Pritisni gumb

Garancija in podpora

The POOL BLASTER Max CG comes with a 1-letna omejena garancija proizvajalca from the purchase date. For warranty claims, technical support, or replacement parts, please contact Water Tech Corp customer service. Refer to the contact information provided in your purchase documentation or visit the official Water Tech Corp webmesto.

Proizvajalec: Water Tech Corp

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.