Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Lastnosti

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Dnevni in tedenski program: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
• LCD zaslon: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Možnosti namestitve: Designed for DIN rail mounting or wall mounting using the included bracket.
• Prozoren zaščitni pokrov: Provides protection for the display and controls.

3. Nastavitev in namestitev

Opozorilo: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Montaža

The E305DIN1 timer can be mounted in two ways:

• Montaža na DIN letev: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Montaža na steno: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Električna povezava

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Preden ponovno vzpostavite napajanje, dvakrat preverite tesnost in pravilnost vseh priključkov.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Navodila za uporabo

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Nastavitev trenutnega časa in dneva

1. Pritisnite URA gumb.
2. Med držanjem URA, pritisnite DAN gumb, da nastavite trenutni dan v tednu.
3. Med držanjem URA, pritisnite URA gumb za nastavitev trenutne ure.
4. Med držanjem URA, pritisnite MIN gumb za nastavitev trenutne minute.

4.2 Programiranje časov vklopa/izklopa

The timer allows for up to 8 ON/OFF program pairs.

1. Pritisnite PROG button once to enter program mode. The display will show '1 ON'.
2. Uporabite DAN, URA, in MIN buttons to set the desired ON time for program 1.
3. Pritisnite PROG ponovno. Na zaslonu se bo prikazalo »1 IZKLOP«.
4. Uporabite DAN, URA, in MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Pritisnite URA button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Pritisnite PRIROČNIK gumb za kroženje med načini:
• VKLOPLJENO: The output is continuously ON, overriding any programmed OFF times.
• IZKLOPLJENO: The output is continuously OFF, overriding any programmed ON times.
• SAMODEJNO: The timer operates according to the programmed ON/OFF schedules.

5. Vzdrževanje

The Perel E305DIN1 timer requires minimal maintenance.

• Čiščenje: Zunanjost obrišite z mehko, suho krpo. Ne uporabljajte abrazivnih čistil ali topil.
• Varnostno kopiranje baterije: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outagV tem primeru bo baterijo morda moral zamenjati usposobljen tehnik.
• Okoljski pogoji: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Odpravljanje težav

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Časovnik se ne vklopi/izklopi, kot je programirano:
  • Preverite, ali je časovnik vklopljen AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• Zaslon je prazen ali utripa:
  • Preverite glavno napajanje časovnika.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• Časovnik izgubi nastavitve po izpadu napajanjatage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Če ti koraki ne odpravijo težave, se obrnite na podporo strankam.

7. Specifikacije

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Garancija in podpora

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Za namene garancije shranite račun kot dokazilo o nakupu.