Uporabniški priročnik za Smart-AVI DVS-400S DVI video razdelilnik

1. Uvod

Hvala za nakupasing the Smart-AVI DVS-400S DVI Video Splitter. This device is designed to distribute a single DVI video source to multiple DVI displays, maintaining high-quality video signals over extended distances. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit.

2. Varnostne informacije

Please observe the following safety precautions to prevent damage to the unit and to ensure your safety:

Te enote ne izpostavljajte vodi, vlagi ali prekomerni vlažnosti.
Enote ne postavljajte na nestabilno površino.
Uporabljajte samo napajalnik, ki je priložen enoti.
Ne blokirajte prezračevalnih odprtin.
Za vse servise se obrnite na usposobljeno servisno osebje.
Disconnect power before cleaning. Clean with a dry cloth only.

3. Vsebina paketa

Preverite, ali so vsi predmeti prisotni in v dobrem stanju:

1 x Smart-AVI DVS-400S DVI Video Splitter Unit
1 x napajalnik
1 x Uporabniški priročnik (ta dokument)

Note: DVI cables and display devices are not included and must be purchased separately.

4. Izdelek je končanview

The DVS-400S is a compact DVI video splitter designed for reliable performance. It features one DVI input and four DVI outputs, allowing a single DVI source to be displayed on up to four DVI monitors simultaneously.

Slika 4.1: Vrh view of the DVS-400S unit. This image shows the compact design and the Smart-AVI branding on the top surface of the device.

Zadaj view of the Smart-AVI DVS-400S DVI Video Splitter, showing DVI input and output ports, and power input.

Slika 4.2: Zadaj view of the DVS-400S unit. This image highlights the DVI input port, four DVI output ports, and the power input jack, along with a power indicator LED.

System diagram showing the Smart-AVI DVS-400S DVI Video Splitter connected to a source and multiple displays.

Slika 4.3: Typical connection diagram for a Smart-AVI DVI distribution system. This diagram illustrates how the DVS-400S (represented by a similar device in the diagram) connects a single DVI source to multiple DVI displays, often utilizing CAT5/6 cables for extended reach with compatible receivers.

5. Nastavitev

Follow these steps to set up your DVS-400S DVI Video Splitter:

Naprave za izklop: Ensure all DVI source devices (e.g., computer, DVD player) and DVI display devices (e.g., monitors, projectors) are powered off before making any connections.
Poveži vir: Connect a DVI cable from your DVI source device to the DVI IN port on the DVS-400S unit.
Povežite zaslone: Connect DVI cables from the DVI IZH ports (1-4) on the DVS-400S unit to your DVI display devices.
Priključite napajanje: Plug the supplied power adapter into the DC 5V power jack on the DVS-400S unit, then plug the adapter into a standard AC power outlet.
Vklop: Power on the DVS-400S unit. The power indicator LED should illuminate. Then, power on your DVI display devices, followed by your DVI source device.
Preverite prikaz: Confirm that the video signal from your source is now displayed on all connected monitors.

Note: For optimal performance, use high-quality DVI cables. The maximum supported resolution is 1920x1200 (WUXGA).

6. Navodila za uporabo

The DVS-400S is a plug-and-play device and requires no additional software or drivers. Once connected as described in the Setup section, it will automatically split and distribute the DVI signal.

Porazdelitev signala: The unit will replicate the input DVI signal to all four output ports simultaneously.
Podpora za ločljivost: Supports DVI resolutions up to 1920x1200 (WUXGA) and 1280x1024 (SXGA).
Dolžina kabla: The effective cable length depends on the resolution and cable quality. Refer to DVI specifications for maximum recommended lengths.

7. Vzdrževanje

The DVS-400S requires minimal maintenance. Follow these guidelines to ensure longevity:

Čiščenje: Pred čiščenjem izključite napajanje. Za brisanje zunanjosti enote uporabite mehko, suho krpo. Ne uporabljajte tekočih ali aerosolnih čistil.
Prezračevanje: Zagotovite ustrezno prezračevanje enote. Ne blokirajte prezračevalnih odprtin.
Shranjevanje: If storing the unit for an extended period, disconnect all cables and store it in a cool, dry place.

8. Odpravljanje težav

If you encounter issues with your DVS-400S, refer to the following troubleshooting guide:

Težava	Možen vzrok	rešitev
No video output on any display.	Napajalnik ni priključen ali je pokvarjen. DVI cables loose or faulty. Izvorna naprava ni vklopljena ali ne oddaja signala. Display devices not powered on or set to correct input.	Check power connection to the DVS-400S and outlet. Ensure all DVI cables are securely connected. Try different cables. Verify the source device is on and sending a DVI signal. Check display power and input settings.
Slaba kakovost videa ali utripanje.	Long or low-quality DVI cables. Resolution exceeding unit capabilities.	Use shorter, higher-quality DVI cables. Zmanjšajte ločljivost izvorne naprave.
Only some displays show video.	Faulty DVI output port on the splitter. Faulty DVI cable to specific display. Faulty display.	Try swapping cables between working and non-working outputs. Test the non-working display with a different source.

9. Specifikacije

Model	DVS-400S
Vhodna vrata	1 x DVI-I Single Link
Izhodna vrata	4 x DVI-I Single Link
Podprte ločljivosti	Up to 1920x1200 (WUXGA), 1280x1024 (SXGA)
Napajalnik	DC 5V (prek priloženega napajalnika)
Dimenzije (D x Š x V)	22.35 x 16.26 x 11.18 cm (približno 8.8 x 6.4 x 4.4 palca)
Teža	680.39 g (približno 1.5 lbs)
Delovna temperatura	0 °C do 40 °C (32 °F do 104 °F)
Temperatura shranjevanja	-20 °C do 60 °C (-4 °F do 140 °F)

10. Garancija in podpora

Smart-AVI products are designed for reliability and performance. For warranty information and technical support, please refer to the official Smart-AVI webspletno mesto ali se obrnite neposredno na njihovo službo za stranke. Račun shranite kot dokazilo o nakupu za uveljavljanje garancije.

Za najnovejše informacije in vire podpore obiščite: www.smartavi.com

Smartavi DVS-400S