Uporabniški priročnik za ultra mobilni širokozaslonski DLP projektor InFocus IN1102

Uvod

This manual provides comprehensive instructions for the setup, operation, and maintenance of your InFocus IN1102 Ultra Mobile Widescreen DLP Projector. Please read this manual thoroughly before using the projector to ensure proper functionality and to maximize its performance and lifespan.

The InFocus IN1102 is designed for portability and performance, featuring WXGA native resolution, 2200 lumens brightness, and DisplayLink™ USB connectivity for simplified setup.

Kaj je v škatli

Upon unpacking your InFocus IN1102 projector, please verify that all the following items are included:

• InFocus IN1102 Projector
• Napajalni kabel
• Navigator II Remote
• USB (A to mini-B) Cable
• VGA kabel
• Torbica za prenašanje

Konec izdelkaview

Familiarize yourself with the various components and connection points of your InFocus IN1102 projector.

Slika 1: Spredaj View with Lens Cap. This image shows the front of the InFocus IN1102 projector, featuring the lens covered by a protective cap and the InFocus logo prominently displayed. The ventilation grille is visible on the left side.

Slika 2: Spredaj View without Lens Cap. This image displays the front of the projector with the lens cap removed, revealing the projector lens. The InFocus branding and ventilation are clearly visible.

Figure 3: Rear Panel with Connectivity Ports. The rear panel of the InFocus IN1102 is shown, highlighting the various input ports including DisplayLink USB, VGA (Computer 1 and Computer 2), Video 1 (S-Video), Video 2 (Composite), and Audio In. The power input socket is on the far left.

Figure 4: Top Panel and Control Keypad. Ta slika prikazuje pogled od zgoraj navzdol view of the projector, showcasing the LiteTouch™ control panel with buttons for power, auto image, keystone, menu, select, volume, and source selection. The InFocus logo is centered on the top surface.

Slika 5: Pod kotom View with Adjustable Foot. An angled perspective of the projector, illustrating the front adjustable foot extended for tilt adjustment. The lens and front ventilation are visible.

Nastavitev

1. Umestitev: Position the projector on a stable, flat surface. Ensure adequate ventilation around the unit. Adjust the front foot to achieve the desired projection angle.
2. Napajalni priključek: Connect the supplied power cord to the projector's power input socket (refer to Figure 3) and then to a grounded electrical outlet.
3. Connecting a Source:
   • DisplayLink™ USB: For quick setup, connect the USB (A to mini-B) cable from your computer's USB port to the "Computer 1 DisplayLink" USB port on the projector (refer to Figure 3). This eliminates the need for a separate VGA cable and simplifies configuration.
   • VGA: Connect the supplied VGA cable from your computer's VGA output to either the "Computer 1" or "Computer 2" VGA input on the projector (refer to Figure 3).
   • Video vhodi: For standard video sources, use the "Video 1" (S-Video) or "Video 2" (Composite) inputs. Connect audio using the "Audio In" port if necessary.
4. Vklop: Press the power button on the projector's control panel (refer to Figure 4) or the remote control. The projector will initiate its startup sequence.
5. Prilagoditev fokusa: Rotate the focus ring on the projector lens until the projected image is sharp and clear.

Navodila za uporabo

Powering On/Off (LiteSwitch™)

The InFocus IN1102 features LiteSwitch™ technology for instant power on and off. Press the power button once to turn the projector on. To turn it off, press the power button again. There is no "cool down" period required, allowing for faster transitions between meetings.

Using the LiteTouch™ Keypad

The backlit LiteTouch™ control panel on the top of the projector (Figure 4) provides direct access to common functions:

• Gumb za vklop: Vklopi ali izklopi projektor.
• Samodejna slika: Automatically optimizes the image settings for the current input source.
• Ključni kamen: Adjusts the image to correct for trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
• meni: Dostopi do zaslonskega menija (OSD) za napredne nastavitve.
• izberite: Confirms selections within the OSD menu.
• obseg: Prilagodi izhodni nivo zvoka.
• Vir: Cycles through available input sources (Computer 1, Computer 2, Video 1, Video 2).

DisplayLink™ Connectivity

When using DisplayLink™ via USB, the projector automatically detects the connection and displays content from your computer. This technology simplifies setup by eliminating the need for complex display settings on your computer.

Image Orientation for Mounting

The InFocus IN1102 supports horizontal image flipping for rear projection setups. However, it does not include a built-in vertical image flip option for ceiling-mounted installations. If ceiling mounting is desired, third-party software on the connected computer may be required to invert the image vertically. Please consult your computer's operating system or display driver settings for this functionality.

Vzdrževanje

Čiščenje projektorja

• Zunanjost: Uporabite mehko krpo, ki ne pušča vlaken, dampened with water or a mild, non-abrasive cleaner to wipe the projector's casing. Izogibajte se agresivnim kemikalijam.
• Objektiv: Gently clean the projector lens with a lens cleaning cloth or a soft, dry, lint-free cloth. Do not use abrasive materials or excessive force.

Dizajn brez filtrov

The InFocus IN1102 utilizes DLP® technology with a filter-free design, which reduces the need for regular filter cleaning or replacement, simplifying maintenance.

Odpravljanje težav

Če imate težave s projektorjem, si oglejte naslednje pogoste težave in rešitve:

• Ni prikazane slike:
  • Prepričajte se, da je projektor vklopljen in da jeamp je osvetljen.
  • Verify that the video cable (USB or VGA) is securely connected to both the projector and the source device.
  • Press the "Source" button on the projector or remote to cycle through input sources until the correct one is selected.
  • Check your computer's display settings to ensure the external display is enabled or duplicated.
• Slika je zamegljena:
  • Prilagodite obroč za ostrenje na objektivu projektorja.
  • Prepričajte se, da je projekcijska površina ravna in da je projektor na ustrezni razdalji.
• Image is Trapezoidal (Wider at Top/Bottom):
  • Use the "Keystone" adjustment on the control panel to correct the image shape.
  • Ideally, position the projector perpendicular to the screen to minimize keystone correction.
• Brez zvoka:
  • Ensure the audio cable is connected if using VGA or video inputs. DisplayLink™ USB typically carries audio.
  • Adjust the volume using the projector's controls or the remote.
  • Preverite nastavitve zvočnega izhoda na izvorni napravi.

For further assistance, please refer to the InFocus support webspletno mesto ali se obrnite na službo za stranke.

Specifikacije

Key technical specifications for the InFocus IN1102 projector:

Garancija in podpora

The InFocus IN1102 projector comes with the following limited warranty:

• deli: 5 leti
• delo: 2 leti
• Lamp: 6 mesecev

For warranty claims, technical support, or additional product information, please visit the official InFocus webspletno mesto ali se obrnite na njihovo službo za pomoč strankam. Račun shranite kot dokazilo o nakupu za potrditev garancije.