Dorman 03339

Dorman 03339 Cable Stops 1/8 In. Instruction Manual

Konec izdelkaview

The Dorman 03339 Cable Stops are designed to securely anchor various types of cables, particularly those with a 1/8 inch diameter. Manufactured from high-quality materials, including brass, these cable stops offer rust prevention and long-lasting durability. They are suitable for a wide range of automotive and household projects requiring a reliable cable termination or adjustment point.

Two Dorman 03339 Cable Stops, each consisting of a cylindrical body with a side hole and a threaded bolt with a hexagonal head.

Image: Two Dorman 03339 Cable Stops, showing their construction with a cylindrical body and a threaded bolt.

Lastnosti izdelka

  • Wire Diameter Compatibility: Designed for 1/8 inch wire diameters.
  • Material: Constructed from high-quality brass for rust prevention and durability.
  • Vsestranska uporaba: Suitable for various automotive and diverse household projects.
  • Enostavnost namestitve: Zasnovan za enostavno namestitev.
  • Pakiranje: Conveniently packaged in quantities of two.

Specifikacije

SpecifikacijaPodrobnost
Številka modela03339
ZnamkaDorman
Vrsta priključkaKabelska ključavnica
Kontaktni materialCopper (Brass)
Izolacijski materialNeizolirano
Tip terminalaVijačni terminal
Največja glasnosttage12 voltov (DC)
Mere predmeta (D x Š x V)5.5 cm D x 1.75 cm Š x 0.5 cm V
Teža predmeta0.03 funta
Število enot2.0 štetje
UPC037495033398

Navodila za namestitev

These cable stops are designed for simple installation to secure or terminate cables. Follow these general steps:

  1. Pripravite kabel: Ensure the cable end is clean and free of fraying. If necessary, trim the cable to the desired length.
  2. Vstavite kabel: Thread the end of the cable through the small hole in the cylindrical body of the cable stop.
  3. Position the Cable Stop: Slide the cable stop along the cable to the desired position where it needs to be anchored or terminated.
  4. Privijte vijak: Use an appropriate tool to tighten the screw terminal on the side of the cable stop. Ensure the screw is tightened firmly to compress the cable and prevent it from slipping. Do not overtighten, as this could damage the cable.
  5. Preveri varnost: Gently pull on the cable to confirm that the cable stop is securely fastened and does not move.
Od blizu view of two Dorman 03339 Cable Stops, highlighting the screw mechanism for securing a cable.

Image: Detail of the Dorman 03339 Cable Stop, showing the screw terminal for cable insertion and tightening.

Funkcija in uporaba

Once installed, the Dorman 03339 Cable Stop serves as a fixed point on a cable. This is essential for applications such as:

  • Zavorni kabli: Securing the end of bicycle or small engine brake cables.
  • Throttle Cables: Providing an adjustable stop for throttle mechanisms.
  • Choke Cables: Anchoring choke cables in various equipment.
  • Splošni namen: Creating custom cable lengths or repair solutions where a permanent end stop is required.

The screw terminal design allows for adjustment and re-positioning if needed, providing flexibility in various applications.

Vzdrževanje

Dorman 03339 Cable Stops require minimal maintenance due to their durable brass construction. However, periodic inspection is recommended:

  • Vizualni pregled: Regularly check the cable stop and the cable for any signs of wear, corrosion, or damage.
  • Preverjanje tesnosti: Ensure the screw terminal remains tight and the cable stop is not loose on the cable. Re-tighten if necessary.
  • Čiščenje: If used in harsh environments, clean the cable stop with a damp krpo, da odstranite umazanijo ali ostanke. Izogibajte se abrazivnim čistilom.

Odpravljanje težav

If you encounter issues with your Dorman 03339 Cable Stops, consider the following:

  • Cable Slippage: If the cable slips through the stop, ensure the screw terminal is adequately tightened. Verify that the cable diameter is 1/8 inch; using an incorrect cable size may lead to slippage.
  • Težavnost zategovanja: Check for any debris or damage to the screw threads or the cable stop body. Ensure you are using the correct tool for tightening.
  • Korozija: While made of brass for rust prevention, extreme conditions can still cause degradation. If significant corrosion occurs, replacement may be necessary.

Garancija in podpora

The Dorman 03339 Cable Stops are backed by a Omejena doživljenjska garancija. For warranty claims or technical assistance, please refer to the official Dorman Products webali se obrnite na njihovo podporo strankam.

Dorman also provides support through their ASE Blue Seal Certified technical support team, available to assist with product-related inquiries.

Za dodatne informacije obiščite Trgovina Dorman na Amazonu.

© 2026 Izdelki Dorman. Vse pravice pridržane.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.