Viper 479V Responder Remote Instruction Manual

1. Izdelek je končanview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Ključne značilnosti:

• Dvosmerna komunikacija: Provides visual and audible confirmation when commands are sent successfully.
• Razširjen obseg: Operates with up to 1/2 mile range.
• LCD zaslon: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Združljivost sistema

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Viper 542V
• Viper 434V
• Viper 554V
• Viper 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Pripravite vozilo:
   • Open the driver's side door.
   • Vstavite ključ v ključavnico za vžig.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Vstopite v način programiranja:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and drži it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and drži it. The car's siren will chirp once.
4. Program za daljinsko upravljanje: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Zapustite način programiranja: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Testni daljinski upravljalnik: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Upravljanje daljinskega upravljalnika

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Osnovne funkcije:

• Zaklepanje: Press the lock button to arm your vehicle's security system and lock the doors.
• Odklepanje: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Oddaljeni zagon: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Pomožne funkcije: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Vzdrževanje

Zamenjava baterije:

The Viper 479V remote requires dve AAA bateriji for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Poiščite pokrov predalčka za baterije na zadnji strani daljinskega upravljalnika.
2. Previdno potisnite ali odpnite pokrov, da odprete predal.
3. Odstranite stare baterije AAA.
4. Vstavite dve novi bateriji AAA in pazite na pravilno polarnost (+/-).
5. Varno namestite pokrov prostora za baterije.

Nega in rokovanje:

• Izogibajte se izpostavljenosti vodi: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Zaščitite pred kapljicami: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Nežno očistite: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• Temperaturni ekstremi: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. Odpravljanje težav

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• Daljinski upravljalnik se ne odziva:
  • Preverite in zamenjajte baterije AAA.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Zmanjšan doseg:
  • Zamenjajte baterije.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• Težave z LCD zaslonom:
  • If the display is dim or blank, replace the batteries.
  • If the display is physically damaged, the remote may need replacement.
• Gumbi ne delujejo:
  • Ensure the remote is clean and free of debris around the buttons.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Specifikacije

8. Informacije o garanciji

The Viper 479V Responder Remote comes with a 1-letna garancija proizvajalcaTa garancija krije napake v materialu in izdelavi pri normalni uporabi. Za uveljavljanje garancije shranite dokazilo o nakupu.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Podpora

For further assistance, technical support, or inquiries not covered in this manual, please refer to the following resources:

• Viper Official Webspletno mesto: Visit the official Viper website for product updates, FAQs, and additional support documentation.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Storitev za stranke: Refer to your product packaging or the Viper webspletno mesto za kontaktne podatke za pomoč strankam.